Cypress CA-USBHUT Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Cypress CA-USBHUT. Cypress CA-USBHUT 16 pages. Multi-functioning hdmi/usb/rs- 232 & ir over single cat5e/6 transmitter and receiver extender box
Également pour Cypress CA-USBHUT : Manuel d'utilisation (11 pages)

Imprimer la page

7. Operation Controls and Functions

7.1 Transmitter's Front Panel

LINK

USB

① ②

① This LED will illuminate when the transmitter is linked with receiver's signal.

② USB LED: This LED will illuminate when the transmitter has linked with

receiver's USB signal. User are only able to control the USB in (the source

device) when this LED is not illuminated.

③ LINK PAIR SELECT: This dip switch allows user with matrix setting for link up

to 16 pairs of the devices with single IP router. Each pair must have

the same dip switch setting in order to pair to the right device setting. The

factory default setting is at 0000.

7.2 Transmitter's Rear Panel

① ②

① DC 5V: Plug the DC power supply into the unit and connect the adaptor

to AC wall outlet. Power LED will illuminate when the power is on.

② Power LED: The red LED will illuminate when the device is connected with

power.

③ USB IN: This slot is to connect with PC/Notebook for input source signal

with USB B type cable.

④ CAT5e/6 OUT: This slot is to connect with CAT5e/6 cable with receiver

side ' s CAT5e/6 input.

⑤ HDMI IN: This slot is to connect with input source such as DVD or Blu-Ray

player with connection cable.

⑥ RS 232 IN: This slot is to connect with D-Sub 9pin female null moden cable

from PC ' s system for controlling both the input source and output display

over RS-232.

⑦ IR BLASTER: This slot is to connect with IR blaster cable included in the

package for IR signal sending and controlling the HDMI input source

equipment.

③

④

LINK PAIR SEL

HDMI/USB/IR/RS232 to CAT5e/6 Transmitter

③

⑤

⑥

⑦