Cypress Envirosystems WPT-800-DB Series Manuel d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cypress Envirosystems WPT-800-DB Series. Cypress Envirosystems WPT-800-DB Series 20 pages. Wpt-db series deadband wireless pneumatic thermostat
Imprimer la page•
Dispose of used battery promptly in accordance with local regulations (place in
plastic bag and recycle if possible).
•
Do not insert batteries with the
•
Do not short-circuit.
•
Be sure to wrap each battery when disposing or storing to avoid short circuit.
•
If leaked liquid gets in the eyes, wash them with clean water and consult a
physician immediately.
•
Do not use new and used batteries together. Do not use different types of
batteries together.
•
Do not apply strong pressure to the batteries nor handle roughly.
•
Do not use or leave the batteries in direct sunlight or in high-temperature areas.
2.2
Configuring the WPT-DB
NOTE: When installing the WPT-DB in a standalone mode, please skip to Section
2.2.4.
The WPT-DB can be configured using the LCD display and the 3 front buttons. The
menu structure is displayed below. Please refer to this diagram while calibrating and
configuring the WPT-DB.
WPT-DB Installation Manual
Document No. 910-00014-01, Rev. 04
and
polarities reversed.
Page 6 of 20