Dolphin ESRPZ Manuel d'installation

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dolphin ESRPZ. Dolphin ESRPZ 2 pages. Rocker pad (single, double) for zigbee green power

Imprimer la page

Rocker Pad (Single, Double) for ZigBee Green Power

4.95"

125.76mm

3.21"

.74"

81.76mm

18.84mm

Package Contents

▪

Rocker pad

▪

Wall plate

▪

Screws and wall anchors

Product Description

Self-powered wireless Rocker Pads provide a flexible and conve-

nient interface for switching, dimming and controlling electrical

loads. Energy generated by pressing a rocker pad is harvested

and used for RF communications with ZigBee 3.0 devices sup-

porting ZigBee Green Power telegrams.

Single and Double Rocker pads can be surface mounted or

installed flush over an existing wall box.

Features Include:

▪

User interface for switching, dimming (when used with a

dimmable controller) and more.

▪

Harvests energy from linear motion - no batteries.

▪

Transmits unique IEEE 802.15.4 / ZigBee Green Power mes-

sage each time pressed or released.

Specifications

Power Supply

Transmission Range

RF Communications

Dimensions

Weight

Environment

Agency Compliance

4.95"

125.76mm

4.52"

114.99 mm

.72"

18.34mm

Tools Required

▪

Power drill, 3/16" bit

▪

Screwdriver

▪

Leveling tool

Mechanical energy harvesting

(power is generated by the motion of

pressing the switch)

50 ft. (15 m)

IEEE 802.15.4 / ZigBee Green Power

Single: 4.95" H x 3.21" W x 0.74" D

(126mm x 82mm x 19mm)

Double: 4.95" H x 4.52" W x 0.72" D

(126mm x 115mm x 18mm)

Single: 3.9 oz (112g)

Double: 5.3 oz (150g)

• Indoor use only

• 14° to 104°F (-10° to 40°C)

• 20% to 95% relative humidity

(non-condensing)

FCC, IC

Planning

Take a moment to prepare and ensure optimal communications

with other system components, and for user convenience.

▪

Pick a convenient location, perhaps near a door where oc-

cupants enter and exit

▪

Consider the construction materials in the space and ob-

stacles that may interfere with RF signals

Installing

1. Decide where you want to mount the rocker pad. The stan-

dard height for wall switches is 49" or 125 cm on center.

2. Remove the wall plate from the rocker pad assembly.

3. Decide which of the two installation options is appropriate.

A. Surface Mounted Installation

Using a level and a pencil, lightly mark 2 small dots to

align the top edge of the mounting plate.

ii. Mark the mounting screw drill points.

iii.

iv. Drill holes for the wall

anchors with a 3/16" drill

bit and insert wall

anchors.

v. Insert the top screw(s)

loosely and level the

back plate.

vi. Insert the bottom screw(s),

and then hand tighten

the top screw(s).

vii. Attach the wall plate on

top of the rocker pad

using the two screw holes.

NOTE: For proper

assembly, make sure to

align the "top" labels

on the rocker pad and wall plate

Installation Guide

Models: ESRPZ, EDRPZ

estimated time: 10 minutes

Page 1