Asian Power devices WA-36A12S Installation - Page 2

Parcourez en ligne ou téléchargez le pdf Installation pour {nom_de_la_catégorie} Asian Power devices WA-36A12S. Asian Power devices WA-36A12S 4 pages.

Imprimer la page

Location and function of controls

This following is the general figure of the design of the drive.

The drive's appearance and specifications may change without prior notice.

Front View

1. Disc Tray

2. Drive activity indicator (LED)

3. Emergency Eject Hole

4. Open/Close button

Rear View

1. USB Connector

This connector is used to connect to the USB cable.

2. Power Switch

Use this switch to turn the drive on and off.

3. Power Connector

This connector is used to connect to the AC Power adapter cord.

Loading and ejecting a disc

Remember - AC adapter must be connected.

Make sure the power is turned on.

Loading a disc

1. Touch the Eject Button to open the Disc tray.

2. Load a disc. (Label facing up.)

3. Close the Disc tray.

Ejecting a disc

1. Touch the Open/Close Button to open the Disc tray.

2. Removing the disc.

3. Close the Disc tray after removing the disc.

NOTES

Emergency Eject

This drive has a feature that allows the CD to be ejected manually in case

of a drive failure or a power outage.

NOTE: Don't use this feature except in an emergency.

1) Turn the power switch OFF.

2) Poke a fine-tipped object (such as a straightened heavy duty paper clip)

into the small hole above the eject button. The front door will pop open

and the disk tray will come partway out.

3) Pull the front door to open it all the way, then grip the disc tray

between thumb and forefinger and gently pull it straight out.

NOTES

NOTE: Use this feature for an emergency

purpose only. Using it excessively will

cause malfunction.

* If you cannot get a good grip on the disc tray with your fingers, use a

steel binder clip or spring clamp to pull it out.