Cypress Semiconductor CapSense CY3280-SLM Manuel de démarrage rapide

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cypress Semiconductor CapSense CY3280-SLM. Cypress Semiconductor CapSense CY3280-SLM 2 pages. Linear slider module

Imprimer la page

Arrow.com.

Downloaded from

CY3280-SLM UNIVERSAL CAPSENSE

1. Insert the kit CD in the CD drive.

2. Install the kit contents, PSoC Designer, and

PSoC Programmer.

3. The hardware prerequisites for this kit are the

CY3280-20x34* Universal CapSense Controller

(UCC) board and MiniProg1.

* Note The ordering part number for CY3280-20x34 UCC is

CY3280 - BK1.

1. Connect MiniProg1 to the CY3280-20x34

UCC Board's ISSP connector (J3). Connect it to

your PC using a USB cable.

2. Open PSoC Programmer and click File>File

Load. Browse and load the

CY3280_20x34_PD_Project1.hex file*.

3. Click Connect; connect MiniProg1 to PC.

4. Click Program button to program the device.

5. Click Toggle button to power the board.

Note These files are located at: <Install directory>

\Cypress\CY3280-SLM\<version>\Firmware

LINEAR SLIDER MODULE

KIT QUICK START GUIDE

1. Connect the CY3280-SLM board to the

CY3280-20x34 UCC board's P2 connector.

2. In the CY3280-20x34 board, place the

jumper on header J1 to short pins 2 and 3.

3. In the CY3280-SLM board, place the

jumper on header J2 to short pins 2 and 3.

1. Touch and move the linear slider on the

CY3280-SLM module board. The

corresponding LEDs on the CY3280-SLM

board light up.

2. Touch a button. The corresponding LED

on the CY3280-SLM module board lights

up.

3. You can touch multiple buttons at the

same time. The linear slider and buttons can

be used at the same time.