Cyron HTP2406E Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cyron HTP2406E. Cyron HTP2406E 13 pages. Multicolor led lighting system media highlighter

Imprimer la page

CLEANING

not affect the mounting surfaces. Clean the installation surfaces free of dust/grease to

assure the two-sided tape adheres well.

3. MOUNTING CLIPS Mounting clips can be secured using the two-sided tape or

screws. DO NOT USE SCREWS FOR FASTENING TO ELECTRONIC DEVICES

AND SENSITIVE SURFACES.

CAUTION: Tapes may cause discoloration to some surfaces over time. Remove one

side of the tape liner and apply to the bottom of the clips. Apply pressure for 5 seconds

to assure adhesion. Place clips on the lightbars.

4. LIGHTBAR PLACEMENT Remove the second side of tape liner. Keep the tape

surface clean. Place the bars in the proper location by pressing on the clips for 5

seconds. CAUTION: Never press on the clear lens of bars. Lightbars will get

damaged! Note the direction of the wires being routed to the hub.

5. HUB Mount the hub using screws or tapes. Plug the lightbar connectors into hub

outlets. The plugs are polarized and can only be plugged in one direction.

6. CONTROLLER Use tape to mount the controller in an accessible location. Some

painted surfaces may get damaged upon future removal of the tape/controller.

7. POWER UP Plug the power supply into an AC outlet. The plug is polarized (one

blade is wider than the other) as a feature to reduce the risk of electric shock. This

plug will fit in a polarized outlet only one way. If the plug does not fit fully in the

outlet, reverse the plug. If it still does not fit, contact the factory or a qualified

electrician. Never use with an extension cord unless the plug can be fully inserted.

Do not alter the plug.

8. DC JACK Connect the DC power jack into the controller DC cord.

Operations

Using the wipes provided test a small area to make sure it does

Turn the unit on and

adjust the light angle by

twisting the lightbars

within the brackets. Try

several angles to achieve

the desired results.

"MODE" button cycles

through 14 functions as

shown in the diagram.

Press of a button is

confirmed by a short fast

blink of the Indicator