Cyrus AV5 Instructions pour l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisateur pour {nom_de_la_catégorie} Cyrus AV5. Cyrus AV5 10 pages.

Imprimer la page

User Instructions

Connecting a Subwoofer

A subwoofer may be connected with a suitable phono interconnect to

either of the Subwoofer outputs 1#. Twin outputs are provided for systems

which include subwoofers with stereo input connections or for twin

subwoofers.

Video Connections

For audio-visual sources (TV, Video recorder, DVD etc.) a separate video

connection must be made from each source to a video line input of the

TV. Some TVs will offer a choice of video connections. In most systems

the S-Video connection will give the best results (where available).

NOTE:- No video connections are made to the AV8.

MC-BUS Connections

Connecting the MC-Bus sockets 1& of the AV8 in an MC Bus system

provides unified system power control. An MC Bus loop is established by

connecting single phono cables from the MC Bus output of one unit to the

MC Bus input of another. Complete the loop by returning the MC Bus

output of the final component to the MC Bus input of the first. The

drawing below shows an example of MC-Bus wiring for a Cyrus AV8 with

a CD player and two power amplifiers.

With MC-BUS established the power function of all connected Cyrus

components may be controlled from the AV8 front panel or remote

control. When power is switched on, components such as power

amplifiers will switch on automatically.

When a Cyrus stereo integrated amplifier or pre-amplifier is connected

into the MC-BUS loop, setting of the volume calibration level will take

place automatically when the VI/AV input is selected at the Cyrus stereo

amplifier.

Cyrus AV8

Cyrus DVD player

Cyrus SmartPower

SETTING UP THE AV8

The AV8 is a highly versatile product which can be easily configured to

match accurately the requirements of different Home-Theatre systems.

The recommended initial setting up procedure for the AV8 is this-

•

Set speaker sizes

•

Set input names

•

Set the channel balance and positions for the speakers

•

Set special modes of operation

Setting up takes place from the remote control using the SET-UP key

area 3&.

You can return to normal operation from the set-up sequence at any time

by pressing the EXIT key 3% on the remote control.

Setting speaker sizes

The first step in setting-up the AV8 is to set the sizes of each system

speaker using the following key sequence-

Press one of the SPEAKER HOT-KEYs 3& twice to select speaker

size setting. The display will show the chosen speaker name with

the current set size (Fig.4.1).

Choose the correct speaker size with the ADJUST keys 3^. The

options are SMALL (for bookshelf or satellite speakers), LARGE (for

larger stand mounting or floor-standing speakers), or NONE (if a

speaker is not connected in this position).

Press the next SPEAKER HOT-KEY 3& to save this setting and

move on to set the size of the next speaker, and finally the

subwoofer.

The speaker symbols on the display change shape to show the selected

sizes for the system speakers (Fig 4.1 shows large front speakers with

small centre and surround channel speakers).

NOTE:- If SMALL size is selected for all of the system loudspeakers, a

subwoofer must be connected and selected to enable the bass

frequencies to be correctly reproduced.

CAUTION:- For the correct reproduction of DTS encoded recordings

large speakers are recommended for all sound channels. Speaker size

settings are therefore disabled when the AV8 is decoding DTS encoded

recordings. If DTS encoded recordings are played through small system

speakers caution should be exercised to avoid possible damage through

bass overload.

Setting input names

When the AV8 leaves the factory, the input names are set to correspond

to the rear panel connections, for example Input 1 will display as- Input 1,

IN-1 Digital.

The name of any input may be changed to a choice from the following

list-

•

LaserDisc, DVD, DVD 1, DVD 2, DVD-A, CD, CD 1, CD 2, SACD,

CD-R, Jukebox

•

Phono, Deck, Vinyl

•

Tuner, Radio, DAB

•

TV, Satellite, Satellite 1, Satellite 2, Cable

•

Video, VCR, VCR 1, VCR 2, Tape, Cassette, MD, MiniDisc, DAT

•

PC, Games, Special, Keyboard, Aux

To change the names of the inputs, first make a list of each input number

with your preferred name from the choices above. Where an input is not

used, make a note- unused inputs can be switched off.

To rename the current selected input follow this sequence-

Press the SET-UP 1 'INPUT' key 3* on the remote control. The

display will now show the selected input number on the top row and

the current name on the bottom row with brackets (Fig.4.2).

Cyrus AV8