Cyrus dAD1 Instructions pour l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisateur pour {nom_de_la_catégorie} Cyrus dAD1. Cyrus dAD1 13 pages.

Imprimer la page
Cyrus dAD1
TROUBLESHOOTING GUIDE
If you suspect that your dAD1 is not operating to
specification, please read through this section before
returning it to your local dealer.
Disc spinning with no sound
•
Switch off the power to the audio system and check
that connections have been correctly made from the
dAD1 to the amplifier (refer to page 5).
•
If used with an external D/A converter, check the
connection from the 'DIGITAL OUT' socket of the
dAD1 to the D/A converter. Check that power is
applied to the D/A converter and amplifier and that the
input selection and volume control is correctly set.
•
Pause may have been set. Check for the pause symbol
on the display. Press the PLAY/PAUSE key again on
the front panel or handset to cancel pause.
Skipping tracks or distorted sound.
•
The disc may be dirty or scratched. Try playing another
disc. If the disc is dirty, refer to the Disc Maintenance
section on page 10 for details of disc cleaning.
11
Indication 'EO' on the display (Error: Operating)
•
A function has been selected which is not available.
Indication 'ED' on the display (Error: Disc)
•
Check that the disc is loaded label side upward.
•
The disc may be dirty or scratched. Try loading another
disc. If the disc is dirty, refer to the Disc Maintenance
section on page 10 for details of disc cleaning.
Indication 'EP' on the display (Error: Programming)
•
An incorrect key sequence has been used during
programming
No Remote Operation
•
The handset batteries may need to be replaced, in
which case refer to page 8.
• The handset batteries should only be replaced with
type AAA (I.E.C.L R03) batteries.

TROUBLESHOOTING

English