Cyrus PSU-XR Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cyrus PSU-XR. Cyrus PSU-XR 12 pages.

MADE IN ENGLAND

Important – read before making any connections

To avoid possible damage to your audio system, it

is essential to disconnect all system components

from the mains supply before connecting or

disconnecting the system interconnects.

CAUTION: Use only the power interconnect supplied with

the PSU-XR when connecting a PSU-XR to a compatible

Cyrus product. Use of other interconnect cables may cause

a safety hazard.

NOTE: The power interconnect is non-reversible.

• Connect the power interconnect to the outlet on the

back panel of the PSU-XR marked 'PSU-XR OUTPUT'.

Tighten the screw latches on the connector finger tight.

• Locate the power inlet marked 'USE PSU-XR ONLY' on

the back panel of the partnering Cyrus product.

• Place the PSU-XR in a position where the free end

of the power interconnect can reach this power

inlet without stretching the cable or stressing the

connectors.

• Connect the power interconnect to the power inlet.

Tighten the screw latches on the connector finger tight.

Cyrus PSU-XR

Installation

1. Power inlet

2. PSU-XR Power output

3. Upgrade port

NOTE: When a PSU-XR is in use, both the PSU-XR and the

partnering Cyrus product will require connection to the

mains supply.

• Connect the mains power cable to the power inlet on

the back panel of the PSU-XR.

• Connect the remaining system power cables including

connected PSU-XRs to suitable AC power outlets.

Power connections to PSU-XRs and other system

components can be made in any sequence.

NOTE: The means to disconnect this product from the

mains supply is the mains plug. Ensure that the mains plug

is accessible at all times.

UPGRADE

User Instructions