Asivio Vybe Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Asivio Vybe. Asivio Vybe 9 pages. Wireless bluetooth earbuds

6. Previous song: Play the music state Double -click the "touch button" in the left ear

switch the song.

7. The next song: Play the music state Double -click the "touch button" in the right ear

to switch the next song.

8. Receive calls: The connected state, short press the "touch button" to answer the phone

when you have an incoming call (both left and right ears).

9. Hanging the phone: During the call, short press the "touch button" to hang the phone

(both left and right ears).

10. Refuse to listen to the phone: When there is an incoming call, double -click the

"touch button" to refuse the call (both left and right ears).

11.Play/Pause: In the earbud connecting music player, press the left ear or the right ear

to touch the button at one time to play/pause the music.

12. Voice Awakening: In the state of connecting or music connection, long press the

earbud "touch button" for 1-2 seconds to launch the mobile phone voice assistant (all

left and right ears) (*need mobile phone support).

13. Clear pairing records: In the pairing state of a single ear (the other earbud is shut

down on the charging case), the three -shot touch button can be cleared to the pairing

record and shut down and restarted, and then put the cleaned pairing earbud in the

charging case and shut down. Take out another earbud in the pairing status three -click

to clear the pairing state (the single ear is not connected to the aircraft status, you can

double -click to enter the pairing state)

14. Automatic return: When there is a pairing record, turn on the charging case earbud

to automatically enter the pairing state and try to return the connected device (both left

and right ears).

15. Automatic shutdown: The pairing status is more than 20 minutes (including 10

minutes of uninterrupted aircraft) without connecting automatically turn off, or the

battery voltage is lower than 3.0V.

16. Exit pairing status: pairing state for 10 minutes without connection, automatically

exit the pairing state into an unconnected standby state.

17. Enter the DUT mode: The pairing state can be performed by DUT test.

18. Enter the DFU mode: you can upgrade software.