Cytech KP04A Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cytech KP04A. Cytech KP04A 8 pages.

Imprimer la page

If the LCD displays "Wrong Text. Press *1 to sync".

press and hold the "*" followed by "1" keys to sync

the KP04 text with Comfort. The screen shows

"Downloading" with status bar. After the process

completes, the keypad will reset and "beep". If this

does not work, sign in on the keypad and check if the

Voice menu is heard.

KP04A Settings

The KP04A has ID set to 1 as default. There are

no shunts for configuration or setting in KP04A as

all setting is done through the Settings Menu.

Since the keypad is supplied as ID=1 by default, if

there is another Keypad with the same ID in the

system, this will cause a clash of Ids when the new

keypad is connected.

20 seconds before trying to go into the Settings

menu.

Press and hold the * key for 4 seconds until "Enter

Engineer Code" is seen. If Engineer Code has NOT

been enabled, a message "Engineer Sign in Option

is OFF". Press F0 on the keypad and try again. The

following keys have the functions shown;

Key

The KP04A Settings are shown below;

Settings

Keypad ID

Key Beep

Alert Beep

Backlight

Function

Option Up

Option Down

Go to Save Menu

Options

1* to 15

Soft */ Loud/

Disable

Soft/ * Loud/

Disable

Automatic */ Always

On/ Always Off

Enable* / Disable

To change the ID, wait for

Comment

ID of this keypad

Volume of key beeps

Volume of KP beeps e.g.

Error Long beep

LCD & Keyboard Backlight

setting

IR Receiver