Cytech UCM/4G Manuel de démarrage rapide - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cytech UCM/4G. Cytech UCM/4G 9 pages.
Imprimer la page
Antenna (with cable of approximately 1 metre long)
•
*Subject to change without prior notice
Settings
Connections (on Baseboard)
JP3 - 12V/COM terminal block. Connect to 12V/COM on Comfort if JP2/2A not
•
used. Do not connect if JP2/2A is used to connect back to Comfort.
JP4 - KA/KB terminal block. Connect to KA/KB on Comfort if JP2/2A not used. Do
•
not connect if JP2/2A is used to connect to Comfort.
JP2 and JP2A - 4 way headers (12V/COM/KA/KB). Either connector can be
•
connected to Comfort's J6 connector via the supplied cable when JP3 and JP4 are
not used. This plug-in cable connection is used when the distance between the
controller and UCM/4G is less than 30 centimetres. For longer distances, use the
JP3 and JP4 terminal blocks
Connections (on Daughterboard)
J3 – 5-way connector for voice connection. The 5 way audio cable is to be
•
connected from J3 to J54 (GSM) connector on Comfort II.
U4 – SIM card holder.
•
USB (P2) for firmware upgrade (for future use)
•
J1, J2 - Antenna connectors. Connect GSM antenna to J1 only.
•
Jumper/Switch Settings
SW7 (RS485 ID) – set according to ID of the UCM/4G
•
ID
1
2
3
4
5
6
UCM/4G Quick Start Guide
SW7-A
SW7-B
ON
ON
OFF
ON
ON
OFF
OFF
OFF
ON
ON
OFF
ON
3
SW7-C
SW7-D
ON
ON
ON
ON
ON
ON
ON
ON
OFF
ON
OFF
ON