Ask C1 COMPACT Manuel de l'utilisateur - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ask C1 COMPACT. Ask C1 COMPACT 9 pages.
Imprimer la page
PROJECTION
PROJEKTIONS-
DISTANCES
ABSTÄNDE
WIDE
WEITWINKEL
Distance
Entfernung
Diagonal
Diagonale
Width
Breite
Height
Höhe
TELE
TELEOBJEKTIV
Distance
Entfernung
Diagonal
Diagonale
Width
Breite
Height
Höhe
Variation of +/- 10%.
Abweichung von +/- 10%
CONNECTORS
ANSCHLÜSSE
2
1
1
2
15
3
4
5
10
6
8
3
4
7
USB MOUSE 2
MOUSE 1
DIGITAL
8 PIN MINIDIN
15 HIGH DENSITY DSUB
USB
FEMALE
1 VCC
1 Mac ADB
2 - Data
2 PS/2 clock
3 +Data
3 PS/2 data
4 GND
4 RS232 TXD
5 Not used
6 RS 232 RXD
7 RS 232 CTS
8 GND
L
FCC STATEMENT
devices, terminals, printers, etc.) certified to comply with the Class A limits may be attached to a computer that complies with Class A limits. When connecting to a
peripheral device, a shielded input/output cable is required to ensure compliance with FCC rules. The shielded cable that must be used is supplied with the
equipment. Operation with non-certified peripherals or non-shielded cables is likely to result in interference to radio and TV reception.
and television reception. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of
Part 15 of the FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
·
Reorient the receiving antenna.
·
Relocate the projector with respect to the receiver.
·
Plug the equipment to a different outlet so that equipment
and receiver are on different branch circuits.
·
Fasten cables using mounting screws to ensure adequate EMI control.
available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4.
www.askproxima.no
0.5-3.9m/1.6-12.7 ft.
1.1-10m/3.6-32.5 ft.
0.6-5.2m/1.9-16.9 ft.
0.5-4,2m/1.6-13,7 ft.
0.35-3.2m/1.1-10.4 ft.
This equipment complies with the limits for a Class A comput
You may require the following booklet from the Federal Commu
0.7-6.5m/2.3-21.1 ft.
0.6-5.2m/1.9-16.9 ft.
1.1-10m/3.6-32.5 ft.
This equipment generates and uses radio-frequency energy and
DISTANCES DE
DISTANCIAS DE
PROJECTION
PROYECCIÓN
GRAND ANGULAIRE
GRAN ANGULAR
Distancia
Distance
Diagonal
Diagonale
Largeur
Ancho
Hauteur
Alto
TELEOBJECTIF
TELEOBJETIVO
Distancia
Distancia
Diagonal
Diagonal
Largeur
Ancho
Hauteur
Alto
Variation de +/- 10%
Variazione di +/- 10%
CONNECTEURS
CONECTORES
11
6
1
5
COMPUTER
AUDIO IN
3.5 mm
FEMALE
JACK
1 Analog R IN
TIP: right
2 Analog G IN
RING: left
3 Analog B IN
STEM: common
4 Reserved
5 Reserved
6 Analog R GND IN
7 Analog G GND IN
8 Analog B GND IN
9 Reserved
10 Sync GND IN
11 Reserved
12 DDC/SDA
13 HSync IN
14 VSync IN
15 DDC/SCL
ing device, pursuant to Subpart J of Part 15 of FCC rules. Only peripherals (computer input/output
, if not installed and used in accordance with the instruction manual, may cause interference to radio
nications Commission (FCC): "How to identify and resolve radio and TV interference problems",
MAIN OFFICE: Ask Proxima asa, K. G. Meldahlsvei 9, Postboks 1403, N-1602 Fredrikstad, Norway
Tel: +47 69 34 01 55 Fax +47 69 34 06 32. E-mail: firmapost @ askproxima.no
DISTANZE DI
PROJEKSJONS-
PROIEZIONE
AVSTANDER
GRANDANGOLO
VIDVINKEL
Distanza
Avstand
Diagonale
Diagonal
Larghezza
Bredde
Altezza
Høyde
TELEOBIETTIVO
TELE
Distanza
Avstand
Diagonale
Diagonal
Larghezza
Bredde
Altezza
Høyde
Variación de +/- 10%
Variasjon på +/- 10%
CONNETORI
KONTAKTER
4
3
2
1
L
R
AUDIO
VIDEO
S-VIDEO
PHONO/RCA
4 PIN MINIDIN
FEMALE
FEMALE
STEM: left
1 GND
SHIELD: common
2 GND
3 Luma
PHONO/RCA
4 Common
FEMALE
STEM: right
SHIELD: common
PHONO/RCA
FEMALE
STEM: composite
SHIELD: GND