cytiva 56-4106-11 Manuel d'utilisation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} cytiva 56-4106-11. cytiva 56-4106-11 20 pages. Midjet pressure display unit
Imprimer la page3 Setup and operation
Figure 3.2: A MidJet system and a pressure and temperature display unit
Powering up the display
Connect the pressure display unit power cord to a fuse-protected, electrical outlet of the proper
voltage (110 to 220 VAC, 50 to 60 Hz).
If you need to order a power cord for use outside the United States and Canada, see the part list in
Ordering parts, on page
After making all the connections, power up the pressure display unit using the On/Off switch located
on the back panel of the unit.
10
WARNING
If a pressure transducer leaks, it can release potentially hazardous
process or cleaning fluids and cause bodily harm. To prevent leaks
and the release of potentially hazardous fluids, limit system pres-
sure to 2 barg (30 psig), periodically check pressure transducer
connections for proper assembly and wear. Isolate and depressu-
rize your system before installing, removing, and checking pressure
transducers. Wear the appropriate personal protection devices and
clothing when operating and cleaning the system.
16.
MidJet pressure display unit Instructions for use 18117465 AD