EG 750FX FAT Manuel du propriétaire - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} EG 750FX FAT. EG 750FX FAT 10 pages.

INSTALLATION INSTRUCTIONS

How to Install/Unfold the bicycle out of the box

 ! WARNING: DO NOT ride this bicycle without first installing the Battery. The Battery for
this bicycle is a structural component of the EG Venice 750FX. Riding without the battery
can cause the frame to collapse and cause loss of control and injury to the rider.
 ! WARNING: DO NOT use this bicycle off-road or Off Pavement. This bicycle is
structurally designed only for on Pavement use. Off-road use can cause structural
integrity issues to the bicycle's frame and can cause injury to the rider.
 ! WARNING: Always wear a helmet when riding this bicycle.
 Your folding bicycle is 95% installed. All you need to do is unfold, align the handlebar
stem of the bike and Unfold the pedals. ALL of which are secured using quick releases.
 To begin, unpack the bicycle from the box and cut all the ties that held the bicycle
together during shipping.
 Unfold the Handlebar stem (where the handlebar fits into) section of the bike. Then, bring
the quick release over to the top portion of the bike and secure the lever.
 ! WARNING: the seat post tube must be firmly secured before riding the bike.
 Install the saddle and the handle bar for the bicycle. Both the saddle and the handle bar
can be installed by tightening and locking in their respective quick releases.
 Unfold the pedals by gently lifting them horizontally and they will lock into place.
2