EG Geneva 500MX Manuel du propriétaire - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} EG Geneva 500MX. EG Geneva 500MX 9 pages.

OPERATION INSTRUCTIONS

To turn "ON" the flow of electricity to the bike's electrical system, Press the Power Switch on

Handlebar controller. To turn "OFF" the flow of electricity to the bike, Press and hold the Power button

for 2 seconds on the Handlebar controller.

The Electric bicycle can be operated in 3 different modes:

1. Manual Mode (Level 0) –

 Turn on the electrical system to the electric bike by Press the "Power" button on the

handlebar controller. Press the "Down" button until the display reads "0".

 In this mode, the pedal assist is off

 In this mode, the throttle is still active (or "ON") and will go up to 20mph

 The motor will stop if the brake lever is depressed even if your throttle is still depressed.

2a. Pedal Assist Mode (Level 1, 2 and 3) –

 Turn on the electrical system to the electric bike by Press the "Power" button on the

handlebar controller. Ride the bicycle normally as you would any bicycle.

 The motor will stop if the brake lever is depressed even if you are still pedaling the bicycle.

 The motor will stop when you stop pedaling in this mode.

 To put your bike in pedal assist mode 1, 2 or 3, turn on your bike's electrical system and

then use the up/down button on the handlebar controller to pick the desired pedal assist

level.

 In Pedal assist mode level 1, the system will provide you with the most "miles per charge"

with the battery in use among the pedal assist modes. This is the most power efficient way

to ride your ebike with the motor switched on.

 In Pedal assist mode level 2, the system will provide you with moderate to high "miles per

charge" of battery power use among the pedal assist modes. This is the second most

power efficient way to ride your ebike with the motor switched on.

 In Pedal assist mode level 3, the system will provide you with moderate "miles per charge"

of battery power use among the pedal assist modes. This is the third most power efficient

way to ride your ebike with the motor switched on.

2b. Pedal Assist Mode (Level 4 and 5) –

 Turn on the electrical system to the electric bike by Press the "Power" button on the

handlebar controller. Ride the bicycle normally as you would any bicycle.

 The motor will stop if the brake lever is depressed even if you are still pedaling the bicycle.

 The motor will stop when you stop pedaling in this mode.

 To put your bike in pedal assist mode 4 or 5, turn on your bike's electrical system and then

use the up/down button on the left handlebar control to pick the desired pedal assist level.

 ! CAUTION: Pedal Assist Modes Level 4 and 5 are designed to achieve speeds over 20

MPH. User discretion is advised

 In Pedal assist mode level 4, the system will provide you with the low amount of "miles per

charge" with the battery in use among the pedal assist modes. This mode will provide you

with speeds on pedal assist over 20mph. User discretion is advised.

 In Pedal assist mode level 5, the system will provide you with the least amount of "miles per