BlueParrott C400-XT Manuel de démarrage rapide

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} BlueParrott C400-XT. BlueParrott C400-XT 4 pages.
Également pour BlueParrott C400-XT : Manuel de démarrage rapide (2 pages), Manuel de l'utilisateur (19 pages)

Imprimer la page

SCAN QR CODE BELOW TO DOWNLOAD COMPANION BLUEPARROTT APP

BlueParrott C400-XT

Quick-Start Guide

Package Contents

1. C400-XT

Headset

™

2. Over-The-Head Wearing Style

3. Behind-the-Neck Wearing Styles

(Left & Right)

4. Leatherette Ear Cushion

5. Spare Foam Ear Cushion

6. Spare Microphone Windscreen

7. USB Charging Cable

8. Auto Adapter

9. Quick-Start Guide

10. Warranty and Compliance Insert

Features and Functions

A. Flexible Microphone Boom

(white dot indicates "talk" side)

B. Volume Down

C. Volume Up/Mute

D. Multifunction Button (MFB)

E. Indicator Lights

F. Parrott Button

™

IMPORTANT SAFETY NOTE: Prolonged exposure to high volume levels can damage your hearing. To avoid injury, set the volume

to the lowest comfortable level. If you experience ringing in your ears, or voices sound muffled, stop using the headset. Avoid

turning up the volume to block noisy surroundings. Your ears may adapt to volume that is too high, which could result in permanent

hearing damage without any noticeable discomfort.

Wearing Options – Find Your Fit

The C400-XT headset is supplied with a choice of Over-The-Head

and Behind-The-Neck wearing styles:

1) Attach the headset to the wearing style as shown.

2) Add leatherette or foam ear cushion.

Note, the Behind-the-neck is available as either left or right, the Over-the-head is

reversible for both left and right use.

Wearing and Adjusting the C400-XT

To get the best performance from our noise-canceling technology, position the microphone near

the corner of your mouth. Positioning is important; small adjustments in microphone placement

can improve performance.

1) Place the headset on your head.

2) Position the speaker directly on your ear. You can slide the headband in or out of the side

support for proper fit.

3) Position the microphone about one finger's width away from your face at the corner of your mouth.

4) The headband can be adjusted by gently flexing it outward to loosen or inward to tighten.

Charging

Connect charger cord to the headset's charging port. The headset LED will glow red when

charging and blue when fully charged.

Turning Headset On/Off

Turn Headset On: Hold down the MFB for approximately 2-3 seconds, until you hear a voice

prompt, "Power On." The blue light will quickly flash three times as the headset turns on.

Turn Headset Off: Hold down the MFB for approximately 3-4 seconds, until you hear a voice

prompt, "Power Off." A red light will flash 4 times and the headset will turn off.

One-Touch Pairing (NFC)

1) Make sure that NFC is enabled on your cell phone.

2) Place the NFC zone of your cell phone against the NFC zone

of the headset and hold together until your cell phone

registers the headset.

3) Follow the prompts on your cell phone to complete pairing.

Note: NFC and One-Touch Pairing are dependent on your cell phone. The size and

sensitivity of your phone's NFC zone and the specific way to connect the headset

may vary between devices.

Manual Pairing

Place Headset into Pairing Mode: The headset will go into pairing mode automatically the first

time you power it on, or until it is paired with another device. To pair with another device after

initial pairing, you will need to put it into pairing mode manually:

1) With the headset powered off, press and hold the MFB. You will hear the voice prompt

"Power On". Keep holding the MFB for approximately 10 seconds, until you hear "Pair

mode". Indicator lights will alternately flash between red and blue.

2) The headset will be visible for pairing to devices for 120 seconds.

Pairing to a Cell Phone:

1) Make sure that other Bluetooth devices are turned off or out of range.

2) Place the headset into pairing mode.

3) Put your cell phone in Bluetooth Search/Scan Mode per the manufacturer's instructions.

4) Select "BP C400-XT" to pair. (Passcode is "0000" if needed.)

5) When connected, the headset will give you the voice prompt, "Your headset is connected".

Parrott Button

As provided from the factory, the Parrott Button provides an easy way to mute

the headset when on a call and to activate voice commands. You can also

configure the button for other functions, such as a phone number speed dial,

or to launch a particular application on your phone. To change the Parrott

Button function, download the BlueParrott app for your cell phone (Android or

iOS) or VXi Updater for your computer. Scan the QR code to download the app

or refer to blueparrott.com/parrott for more information.

Voice Commands

The C400-XT recognizes voice commands. You can say "Answer" to answer an incoming call,

or "Ignore" to reject an incoming call. When not on a call, voice commands are initiated with a

quick press of the Parrott Button (default setting) or by pressing and holding the "Volume Up"

button for 1-2 seconds. For a list of commands available, say "What can I say?"

For more information on voice commands, please refer to the complete user guide, available

online.

Quick-Reference Tables

Function

Button/Duration of

Press

Power On

MFB (2-3 seconds)

Power Off

MFB (3-4 seconds)

Enable Pairing

MFB (5-15 seconds)

Mode

Volume Up

Volume

Up (quick press)

Volume Down

(quick press)

Mute (On/Off)

Parrott Button

(quick press) or

Volume Up (2 seconds)

Answer a Call

MFB (quick press)

or say "Answer"

End a Call

MFB (quick press)

Reject a Call

MFB (1-2 seconds)

or say "Ignore"

Transfer Audio

Volume Down

(1-2 seconds)

Initiate Voice

Parrott Button

Commands (when

(quick press) or

in standby mode)

Volume Up (2 seconds)

Low Battery

N/A

Multiple Device Pairing and Advanced Features

The VXi BlueParrott C400-XT can pair with up to eight (8) devices. However, only two (2) devices

may be connected to the headset at one time (multi-point). For more information on advanced

features, please refer to the complete user guide, available online.

For the full user guide, technical notes, and available accessories, go to blueparrott.com/C400-XT.

BlueParrott | 900 Chelmsford Street, Tower II, 8th Floor | Lowell, MA 01851

Toll-Free (USA): 800-742-8588 | Phone: +1 603-742-2888 | blueparrott.com

OTE900

LED Indicator

3 fast blue flashes Short tone

4 fast red flashes

Red and blue,

alternating

NONE

Blue flash, once

per second

Blue flash, every 4

seconds

NONE

Red flash

Audio Indicator

Voice Indicator

(in English)

"Power on"

NONE

"Power off"

NONE

"Pair mode"

Single tone

NONE

Single tone

NONE

Single tone, reminder

NONE

tone every 10 seconds

Two rising tones

NONE

Two falling tones

NONE

Two falling tones

NONE

Long, low tone

NONE

Short tone

"Please say a

command"

NONE

"Battery very low"

NFC Zone