BlueRange UN9000 Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} BlueRange UN9000. BlueRange UN9000 8 pages. Solar powered auto-darkening welding helmet

Imprimer la page
6.7. Replace battery
6.7. Replace battery
When the battery power is low, the Low Battery LED indicator will light up. The filter cartridge lens
When the battery power is low, the Low Battery LED indicator will light up. The filter cartridge lens
may not work correctly.Replace the Batteries.
may not work correctly.Replace the Batteries.
6.8 How to Install the Headgear to Welding Helmet Shell
6.8 How to install the headgear to welding helmet shell
6.8 How to install the headgear to welding helmet shell
6.9. Maintenance
6.9.1. Cleaning and disinfection: Clean filters surfaces regularly; do not use strong cleaning solutions.
6.2.1
Always keep sensors and solar cells clean using a clean lint-free tissue/cloth. You can use alcohol
6.2.1
and cotton to wipe.
6.9.2. Use neutral detergent to clean the welding shell and headband.
6.9.3. Replace outer and inner protection plates periodically.
6.9.4. Don't immerse the lens in water or any other liquid. Never use abrasives, solvents or oil based
6.2.1
cleaners.
You are all set to begin using the helmet.
6.9.5. Do not remove the auto-darkening filter from the helmet. Never try to open the filter.
You are all set to begin using the helmet.
6.9. Maintenance
6.9. Maintenance
6.9.1. Cleaning and disinfection: Clean filters surfaces regularly; do not use

7) Replacing the Battery

6.9.1. Cleaning and disinfection: Clean filters surfaces regularly; do not use
strong cleaning solutions. Always keep sensors and solar cells clean using a clean
strong cleaning solutions. Always keep sensors and solar cells clean using a clean
lint-free tissue/cloth. You can use of alcohol and cotton to wipe.
1. To replace the battery, slide the battery pannel up and
remove the old battery. Replace with CR2450 lithium battery
lint-free tissue/cloth. You can use of alcohol and cotton to wipe.
6.9.2. Use neutral detergent to clean the welding shell and headband.
6.9.2. Use neutral detergent to clean the welding shell and headband.
2. Be sure Positive ( + ) side of battery faces up (toward inside
of helmet). Reinstall the cover battery plate. press the TEST
button. The lens should flash dark once.
Page 6
You are all set to begin using the helmet.
You are all set to begin using the helmet.
6.9. Maintenance
6.9. Maintenance
6.9.1. Cleaning and disinfection: Clean filters surfaces regularly; do not
6.9.1. Cleaning and disinfection: Clean filters surfaces regularly; do not
strong cleaning solutions. Always keep sensors and solar cells clean using a c
strong cleaning solutions. Always keep sensors and solar cells clean using a c
lint-free tissue/cloth. You can use of alcohol and cotton to wipe.
lint-free tissue/cloth. You can use of alcohol and cotton to wipe.
6.9.2. Use neutral detergent to clean the welding shell and headband.
6.9.2. Use neutral detergent to clean the welding shell and headband.
You are all set to begin using the helmet.
6.9. Maintenance
6.9.3. Replace outer and inner protection pl
6.9.1. Cleaning and disinfection: Clean filter
6.9.4. Don't immerse the lens in water o
strong cleaning solutions. Always keep sensors
solvents or oil based cleaners.
lint-free tissue/cloth. You can use of alcohol an
6.9.2. Use neutral detergent to clean the weldin
6.9.5. Don't remove the auto-darkening filte
filter.
7.. Replacing the Battery
Reinstall the cover battery plate. press the TEST
should flash dark once.
Technical specifications
8.
1.
the AD
the Lit
and re
with C
2.
battery
helmet