Ega Master EGATRONIK Manuel d'utilisation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Ega Master EGATRONIK. Ega Master EGATRONIK 17 pages. Non-contact ac voltage detector
Également pour Ega Master EGATRONIK : Manuel d'utilisation (16 pages), Manuel d'utilisation (13 pages)
Imprimer la page
When the surface of meter is dirty, clean with wet cloth and neutral detergent, grinding miller
and solvent are forbidden.
When the meter is damaged and needs to be repaired, please send it to the designated
maintenance center of our company for repair by professional service man, do not repair it without
authorization.
Especially in the process of using, keep the sensitive mirror of meter away
from scratch or dirt to avoid damaging the mirror or influencing the measuring
precision.
Remove the battery if it won't be used for a long time.
Troubleshooting – Causes and Corrective Measures
All message codes are displayed with either or "Error". The following errors can be corrected:
Code
204
The measuring tool is outside the
208
operating temperature range from 0
253
Receiver signal too weak, measurement
255
256
Error
10
GENERAL MAINTENANCE
Cause
Calculation error
Temperature too high
°C to +40 °C
Temperature too high
time too long
Received signal too strong
Hardware error and
uncertainty error
Corrective Measure
Refer to user menu, repeat the procedures
Cool down instrument, make it working
in stable temperature environment
Cool down the instrument
Use target plate or change a good
refection
Target too reflective use target plate or do
not aim
at strong light objective
Switch on/off the device several times. If
the
symbol still appears, try to replace the
battery,
Otherwise your instrument is defective.
Please call
your dealer for assistance