Blueridge BM12Y19 Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Blueridge BM12Y19. Blueridge BM12Y19 9 pages. Inverter split type room air conditioner
Également pour Blueridge BM12Y19 : Manuel du propriétaire (17 pages)
Imprimer la page
OPERATING INSTRUCTIONS
How the air conditioner works
SLEEP operation
AUTO operation
7 hours timer off
When you set the air conditioner in AUTO mode, it will
automatically select cooling, heating(cooling/heating
O
O
1 C/2 F
models only), or fan only operation depending on set
Set
temperature and the room temperature.
O
O
1 C/2 F
Temperature
The air conditioner will control room temperature
1 hour
automatically to the temperature point you set.
1 hour
If you feel uncomfortable in the AUTO mode, you can set
Cooling
your desired temperature.
SLEEP operation
SLEEP operation
When you push SLEEP button on remote controller
7 hours timer off
during cooling, heating(cooling & heating models only),
or AUTO operation , the air conditioner will
O
O
1 C/2 F
automatically increase (cooling) or decrease (heating)
Set
O
O
1 C/2 F
Temperature
1 C/2 F per hour for the first 2 hours, then hold
steadily for the next 5 hours, after that it will switch off.
1 hour 1 hour
This mode saves you energy and brings you comfort
at night.
Heating
DRYING operation
The fan speed will be automatically controlled under
dry operation.
During the dry operation, if the room temperature is
lower than 10 C(50 F), the compressor stops operation
and restarts until the room temperature is above
12 C(54 F).
Optimal operation
To achieve optimal performance, please note the
following:
Adjust the air flow direction correctly so that it is not
towards people.
Adjust the temperature to achieve the highest comfort
level. Do not adjust the unit to excessive temperature
levels.
Close doors and windows on COOL or HEAT modes,
or performance may be reduced.
Use TIMER ON button on the remote controller to
select a time you want to start your air conditioner.
Do not put any object near air inlet or air outlet, as the
efficiency of the air conditioner may be reduced and
the air conditioner may stop running.
Clean the air filter periodically, otherwise cooling or
heating performance may be reduced.
Do not operate unit with horizontal louvre in closed
position.
O
O
O
O
O
O
9
Care and Maintenance
Before maintenance
Turn the system off before cleaning. To clean, wipe with
a soft, dry cloth. Do not use bleach or abrasives.
NOTE: Power supply must be disconnected before
cleaning the indoor unit.
A cloth dampened with cold water may be used
on the indoor unit if it is very dirty. Then wipe it
with a dry cloth.
Do not use a chemically treated cloth or duster to
clean the unit.
Do not use benzine, thinner, polishing powder, or
similar solvents for cleaning. These may cause
Filter Handle
Cleaning the unit
wipe the unit with a soft dry cloth only. If the unit is
very dirty, wipe it with a cloth soaked in warm water.
Cleaning the air filter and air freshening filter
A clogged air filter reduces the cooling efficiency of
this unit. Please clean the filter once every 2 weeks.
1. Lift the indoor unit panel up to an angle until it
stops with a clicking sound. For some models,
please use suspension bars to prop up the panel.
2. Take hold of the handle of the air filter and lift it
up slightly to take it out from the filter holder,
then pull it downwards.
3. Remove the AIR FILTER from the indoor unit.
CARE AND MAINTENANCE
CAUTIONS
the plastic surface to crack or deform.
Never use water hotter than 40 C/104 F to clean
the front panel, it could cause deformation of
discolouration.
Clean the AIR FILTER once two weeks.
Clean the AIR FILTER with a vacuum cleaner
or water, then dry it up in cool place.
10