Asko 1805 FI Manuel d'instructions d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Asko 1805 FI. Asko 1805 FI 12 pages.

Imprimer la page
Asko 1805 FI Manuel d'instructions d'installation

DIMENSIONS

DIMENSIONS
DIMENSIONS
DIMENSIONS
DIMENSIONS
UNIT DIMENSIONS
UNIT DIMENSIONS
UNIT DIMENSIONS
UNIT DIMENSIONS
UNIT DIMENSIONS
US
Measure
Height
32-1/4"–35-1/2"
Width
24"
Depth
22-7/16"
Weight
104 lb
PREP
PREP
ARING
ARING
THE L
THE L
PREPARING
PREP
PREP
ARING THE L
ARING
THE LOCA
THE L
The best place for your dishwasher is in the kitchen
near the sink. This makes it easier to connect the water
and drain supply lines.
A built-in dishwasher must be enclosed on the top,
both sides and the back.
Under-Counter Space Needed
The kick plate supplied with your dishwasher will fit a 24"
opening. When using European standard installation, a
kick plate is available from your ASKO dealer. (Part
Numbers: White=8057528-0; Black=8057528-29)
The electrical and water supplies should enter through
the area indicated by the shading on the illustration
above. They should come through the right side of the
CABINET OPENING
CABINET OPENING
CABINET OPENING
CABINET OPENING
CABINET OPENING
European
Measure
825–900 mm
Height
610 mm
Width*
570 mm
Depth
48 kg
* Models 1805 FI and 1895 do not have fill strips. The
width for these models is 23-1/2" (596 mm).
OCA
OCA
TION
TION
OCA
OCATION
TION
TION
machine, a maximum of 2" from the back wall and 7" to
9" from the floor, depending on the underneath cabinet
height.
Access holes must be round and smooth, and they
must be no bigger than 1-1/2" in diameter.
INST
INST
INST
INSTALLING
INST
(OPTIONAL)
(OPTIONAL)
(OPTIONAL)
(OPTIONAL)
(OPTIONAL)
When it is not possible to fasten the dishwasher to the
cabinet, you should install tip guards to prevent the
machine from tipping when the door is opened. The tip
guards can be attached either to the floor or the wall.
The tip guards should be mounted behind the machine,
19" apart (measuring center to center) and 18-1/2" from
the front of the machine. (Note: This measurement
could vary, depending on the thickness of the custom
panel, if any.)
US
Measure
32-1/4"–35-1/2"
24"
22-7/16"
ALLING
ALLING
THE
THE
TIP GU
TIP GU
ALLING
ALLING THE
THE TIP GU
THE
TIP GUARDS
TIP GU
Rear
We recommend that you install tip
guards when it isn't possible to fasten
the dishwasher to the cabinet.
European
Measure
825–900 mm
610 mm
570 mm
ARDS
ARDS
ARDS
ARDS
Tip Guards
(P/N 8070851)
Page 3