Asko D1976 Manuel de démarrage rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Asko D1976. Asko D1976 2 pages. User manual use & care guide general fr (french version)
Également pour Asko D1976 : Manuel d'utilisation et d'entretien (12 pages), Manuel de planification et de conception (19 pages), Manuel d'utilisation et d'entretien (12 pages), Manuel de planification et de conception (15 pages), (Espagnol) Uso Y Cuidado (12 pages), (French) Manuel D’utilisation Et D’entretien (12 pages)

Imprimer la page
Asko D1976 Manuel de démarrage rapide
QUICK START PROCEDURES
QUICK START PROCEDURES
1. Load the dishwasher. (There's no need to pre-rinse. Simply scrape off large food particles before
you load the dishware.)
2. After you've pushed the baskets back inside the unit, manually rotate the upper and lower spray
arms to be sure they turn freely. Rearrange any item that blocks the wash arms.
3. Make sure there is rinse aid in the dispenser. Add rinse aid, if needed.
4. Add automatic dishwashing detergent and close the dispenser cover. (See "Amount..." below.)
5. Close the door securely. (You should hear it click shut.)
6. Select the desired wash program and option(s). A red light appears above the selected touchpad(s).
7. Press Start. The dishwasher will start.
UNDERSTANDING THE INDICATOR LIGHTS
UNDERSTANDING THE INDICATOR LIGHTS
When the dishwasher has finished, all of the indicator lights will come on. The lights will remain on until you open the door.
you open the door, the indicator light for the wash program you last used will come on. If you used the high temperature options and the
heat dry option, those lights will come on, too.
If all of the lights on the control panel flash in sequence, this means the machine has detected an overfill. (See page 7.) Should this
happen, call the ASKO Advisory Center.
LED WINDOW DISPLAYS
LED WINDOW DISPLAYS
Temperature Settings
Temperature Settings
The wash programs (except Rinse) have water temperature options, as shown in the table below. The LED displays the temperature
selections in degrees Celsius. The table below gives both the Celsius and Fahrenheit temperatures. Once you select a temperature,
it will remain selected until you change it (except the Light and Quick wash programs, which revert to 130° F). We recommend that you
use the lower temperature settings whenever possible to conserve energy.
Wash Program
Pans/Sani, Super & Normal
Light & Quick
Program Time
Program Time
When a program starts, the LED displays the time it took that program to run last time. As the program runs, the LED displays the remaining
time. If the time exceeds an hour, the display alternates between the hour and minutes remaining. The hour is designated by an h (e.g., 1h).
The program times may not always be the same because of variations in the household hot water temperature. The dishwasher heats
the water to the proper temperature for the program selected, so if the temperature of the water entering your dishwasher is too low, the
dishwasher will run longer because it takes longer to heat the water. Raising your water heater setting could help to shorten the cycle
times. If this doesn't help, call the ASKO Advisory Center.
Delay Time
Delay Time
Each time you press Delay, the number in the LED window increases by one hour, up to 12 hours. Continue to press Delay until the number
of hours you wish to delay running the machine is displayed. To cancel delay, press the Delay touchpad until the LED displays zero.
Fault Codes
Fault Codes
The LED window displays three fault codes, as illustrated below.
F1
Indicates a fault in the heater. Call your local service
technician.
F2
Indicates high water level in the machine. Call the ASKO
Advisory Center.
NOTE: When the LED displays three dashed lines, this simply means the door isn't closed completely.
AMOUNT OF DISHWASHING DETERGENT TO USE
AMOUNT OF DISHWASHING DETERGENT TO USE
We recommend that you use only unscented, granular automatic dishwashing detergent. Generally, one tablespoon of detergent is
needed for a normal wash load. More heavily soiled items, however, may need more detergent. Also, the amount of detergent needed
can vary due to differences in water hardness. The harder the water, the more detergent you may need. (See page 5.) In any case, you
should never use more than three tablespoons of detergent.
COMMONLY ASKED QUESTIONS
COMMONLY ASKED QUESTIONS
1)
Why does my dishwasher run so long?
2)
How do I know when the dishwasher is done?
3)
Why do all of the lights stay on?
4)
Why are all of the lights flashing?
5)
Why am I getting a white film on my dishes?
6)
Why is there always water left in the bottom of my machine?
55° C (130° F)
65° C (150° F)
45° C (110° F)
55° C (130° F)
F3
F4
WHERE TO FIND THE ANSWERS
WHERE TO FIND THE ANSWERS
1)
2)
3)
4)
5)
6)
Temperature Options
70° C (160° F)
65° C (150° F)
Indicates a thermistor fault (heater control). Call your
local service technician.
Indicates a problem with the water inlet. Make sure the
water tap under the sink is turned on. If it is, call your
local service technician.
See page 9 in the Use and Care Guide.
See "Understanding the Indicator Lights" above.
See "Understanding the Indicator Lights" above.
See "Understanding the Indicator Lights" above.
See pages 5 and 8 in the Use and Care Guide.
See page 9 in the Use and Care Guide.
Refer to this page in
the Use & Care Guide.
3, 4
3
5, 6
4, 5
W h e n
75° C (170° F)
Art.No 80 731 02 Rev 01