Ambery 4-Way Manuel d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Ambery 4-Way. Ambery 4-Way 4 pages. 4-way hd component video/pc vga scaler/converter

Imprimer la page

4. Operation

Input connection:

This AV-7 universal video scaler model supports both PC VGA type and HD

Component video type inputs.

For PC VGA input, please use the 15-pin D-sub cable to connect the output of a PC

device to the input connector on the back of AV-7.

For component video input, please use the 15-pin VGA to Component RCA adapter cable

for connecting from the component video output of the HDTV device to the HD 15-pin

VGA input connector of this scaler and the scaler will automatically detect the mode

and resolution of the user's PC/HDTV input.

Output connection:

This universal scaler outputs a variety of PC VGA resolutions and HDTV resolutions.

When selecting a VGA resolution for output, please use the 15-pin VGA cable to

connect from the HD 15-pin output of the AV-7 model to the VGA input of a display

monitor.

When selecting a HDTV resolution for output, please use the 15-pin VGA to 3

RCA component video adapter cable to connect from the HD 15-pin output of the

AV-7 to the component video input of a HDTV display .

Note:

Use of wrong cable for your selected output will result in an abnormal picture on the

screen.

Connection Block Diagram:

(a) PC VGA to VGA or PC VGA to HDTV Scaling

(b) HD Component to VGA or Component to Component Video Scaling

AV-7

5. Operation Controls and Functions

Front Panel

Menu(Enter): Press the Menu button will bring up the OSD menu controls on the screen

as follows:

Input set up

Output set up

Picture Adjust

HV Adjust

OSD Adjust

System Information

Auto Adjust

Exit

Use + or - to move the arrow cursor to your desired selection, then press MENU (Enter) to

confirm your selection and enter into sub menu.

Input set up- When selected, a sub menu of clock and phase adjust as below will appear.

Clock

Phase

Use +, - to choose the parameter your want to adjust and then press the Menu(Enter) to

highlight your selection. Once a parameter is highlighted, use +, - to increase or decrease the

setting value.

Press Menu(Enter) again to leave the setting.

Move the arrow to exit then press Menu/Enter to Exit.

Output set up- When selected, the following sub-menu will appear, press + or - button to choose

your desired PC VGA or HDTV output resolution from the following output

resolution table.

Output

Mode

Output resolution:

SXGA

1280 X 1024@60/75Hz

1280 X 960@60Hz

1280A

1024 X 768@60/70/75/85Hz

XGA

1280 X 768@60Hz

WXGA

800 X 600@60/72/75/85Hz

SVGA

640 X 480@60/72/75/85Hz

VGA

VGA 70

720 X 400@70Hz

VESA 85 640 X 400@85Hz

1152 X 864@ 70/75Hz

Rear Panel

32/64

22/32

Setup

XGA-60

HDTV

720p-RGB

1280X 720@60Hz

576p-RGB

720X 576@60Hz

480p-RGB

720 X 480@60Hz

1080i-RGB

1920x1080@60Hz

720p-YPbPr 1280 X 720@50/60Hz

576p-YPbPr 720 X 576@60Hz

480p-YPbPr 720 X 480@60Hz

1080i-YPbPr1920x1080@50/60Hz