Ambery AV-7 Manuel d'utilisation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Ambery AV-7. Ambery AV-7 4 pages. 4-way hd component video/pc vga scaler/converter
Imprimer la page5. Operation Controls and Functions
Picture Adjust: When it is selected the following adjust parameters will appear:
Contrast
Bright
Color
Red
Green
Blue
Reset
Exit
The adjustment range and factory preset vaule are as follows:
Range
Contrast
0-255
Bright
0-255
Color
0-255
Red
0-255
Green
0-255
Blue
0-255
Use + , - and MENU/Enter to adjust the value of your selected parameter.
Select Reset to reset all adjustments back to the factory preset value.
HV Adjust: When it is selected the following sub-menu appears.
H-position
V-position
Use + - to adjust the best horizontal and vertical position of the picture.
Overscan / Underscan: When you have the options of "OVER" and "UNDER" selected
by the + and – buttons. Default setting is "OVER" for over scan
mode, which helps fit the whole output screen perfectly within
the borders of your display. If some areas of the PC screen fall
outside of the TV display as seen being cropped, user can select
"UNDER" for under scan mode for full screen display. Note that
the under scan feature, if needed, only works for certain
input/output resolution combinations.
OSD Adjust: When it is selected, you can adjust the Horizontal and Vertical position
of the OSD menu.
System Information: When it is selected, it shows the input/output resolution and their
vertical refresh rate on the screen.
System Info
INPUT: XGA 60
OUTPUT: XGA 75
Auto Adjust: When selected, unit will automatically adjust all parameters to the preset value.
Note:
* The default output resolution of this scaler is XGA(1024x768 pixels@60Hz).
* At any time press "+" and "-" buttons simultaneously for a few seconds, unit will be
reset to the VGA output resolution at XGA/60Hz, and other settings back to factory
default value. Control screen will be seen on VGA display via VGA cable connection.
* At any time press "MENU" and "-" buttons simultaneously for a few seconds, unit
will be reset to the HD component video output resolution at 480P and other settings
back to default. Control screen will be seen on TV via VGA to component adapter cable.
047
102
064
128
128
128
Default
047
102
064
128
128
128
184
32
5
2. Features
1. All-in-1 solution for HDTV/PC video resolution up scaling and video format conversion.
2. The resolution of any PC or HDTV input can be scaled up or scaled down to any
other PC or HDTV resolution, along with the frame rate converted to a selectable frequency.
3. 48 MB frame memory for frame rate conversion.
4. Easy converting video signal formats and resolutions between VGA and HD Component
5. Input: PC(VGA/SVGA/XGA/SXGA)+
HDTV(480i/576i/480p/567p/720p/1080i), Fh: 60 to 85 Hz
Output: PC(VGA/SVGA/XGA/SXGA)+
HDTV(480p/576p/720p/1080i)
6. Input mode auto detection.
7. Input Setup allows for fine-tuning the output picture to a best
condition through the adjustment of ADC sampling clock, and phase.
8. Easy- to- use push buttons and OSD menu control.
9. Supports last memory function., thus can memorized all customers' setting before
power off and recall those setting on next power on.
10
4-way video processing: VGA to VGA scaling, VGA to HDTV component Video, HD
Component Video to VGA/RGBHV, HD to HD
3. Package Content
The following items are included in the standard shipping package.
1. The 4-way HD component video/PC VGA video scaler unit x 1.
2. 15-Pin D-Sub PC VGA cable x 1.
3. 15-pin VGA to Component Video 3-RCA adapter cable x1.
4. AC power adaptor 12V 800mA, center positive.
Corporate web site:
http://www.ambery.com
Customer service:
scaling.
2