Asko D3331 Manuel d'utilisation et d'entretien - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Asko D3331. Asko D3331 16 pages. Use & care guide asko d3331 fr
Également pour Asko D3331 : Manuel de démarrage rapide (2 pages), (Espagnol) Uso Y Cuidado (16 pages), (French) Manuel D'utilisation (16 pages)

Imprimer la page

Asko D3331 Manuel d'utilisation et d'entretien

CLEANING THE DRAIN PUMP

On occasion something may get through the filters and

into the drain pump. The drain pumps on ASKO

dishwashers are designed to automatically reverse if

anything should get caught in the propellers, thus ejecting

the item back into the sump area or down the drain.

Should you need to remove an obstacle from the drain,

first turn the power off then remove the filters (as

explained on page 9). Next, lift out the adaptor piece on

the left side of the sump area. (You might want to remove

any standing water first.) You can then look into the sump

area for the item causing the obstruction. You may need

to use your finger to move the pump blade and loosen

the object. Should you find something, simply scoop it

out then replace the adaptor piece and the filters.

WARNING!

Never run the dishwasher without the filters in

place.

O O O O O VERFILL PR

VERFILL PR

VERFILL PRO O O O O TECTION

VERFILL PR

Your ASKO dishwasher has an overfill protection device

that automatically shuts off the inlet valve and circulation

pump and starts the drain pump if the water level in the

unit should rise above the normal level. If this happens,

turn the water off at the main supply and call for service.

ENER

ENERGY SA

ENER

GY SA

GY SAVING

GY SA

VING

VING TIPS

VING

ENER

GY SA

VING

♦

If you plan to wash the dishes right away, there's no

need to pre-rinse. Simply scrape off large particles

and load the dishes.

♦

Wash only full loads.

♦

Use the Pots and Pans and Heavy wash programs

only for heavily soiled dishes.

♦

Don't use the high temperature for lightly soiled

dishes.

Page 10

TECTION

TIPS

To reach an item caught in the drain pump, remove the

filters then the small black insert in the sump area.

WARNING!

Be sure to replace the adaptor piece before you

put the filters back in.

If there is water in the base pan due to an overfill or

small leak, the water must be removed before the

dishwasher will start.

When an overfill is detected, the display window will show

a fault message. (See "Fault Codes" on page 8.)

♦

Select the upper or lower basket option when only

one basket is loaded.

♦

Use the Express option when washing only slightly

soiled loads.

♦

Avoid using heat drying. (You can speed up the drying

process by opening the door slightly to release the

moist air.)