d&b audiotechnik ALi90 Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} d&b audiotechnik ALi90. d&b audiotechnik ALi90 14 pages.

Phoenix connector socket, male single PG (standard), dual PG

(optional)

d&b ALi60/ALi90 Manual 1.1 en

WR cabinets are equipped with a recessed connector panel

including 4-pole Phoenix connector socket (Type: DFK PC 4/4

GF). A cover plate which accepts single or dual PG cable glands

(Type PG13.5 for cable diameters from 6 - 12 mm) is enclosed.

NOTICE!

The WR option enables operation of loudspeakers in changing

ambient conditions, however it is not intended to enable

permanent, unprotected operation of loudspeakers outdoors.

▪ Provide an additional cover over the loudspeakers.

▪ Aim the cabinets either horizontally or with a downward tilt.

To install the fixed connection cable, please proceed as follows:

Tools required: Screw driver (#T20).

Note: Observe the wiring diagram of the Phoenix plug and

Phoenix connector socket.

1. Insert the connection cable through the PG screwing and

connect the Phoenix plug to the Phoenix connector socket.

2. Push the cover plate towards the connector panel until it fits

into place.

3. Fix the cover plate to the connector panel using the four

countersunk screws.

2.3 Operation

NOTICE!

Only operate d&b loudspeakers with a correctly configured d&b

amplifier, otherwise there is a risk of damaging the loudspeaker

components.

Applicable d&b amplifiers:

30D/D20/D80.

Amplifier output mode(s): Dual Channel

Application

Setup

ALi60

AL60 PS

AL60 Out

AL60 In

AL60 AP

ALi90

AL90 PS

AL90 Out

AL90 In

AL90 AP

Cabinets per

channel