Asko D5434XXL W Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Asko D5434XXL W. Asko D5434XXL W 20 pages. User manual 8093969 asko d5454 xl en
Également pour Asko D5434XXL W : Spécifications (2 pages), Spécifications (2 pages), Manuel d'utilisation (20 pages)

Imprimer la page

time is shown, for example, as 1:15, which means the program will

run for another 1 hour and 15 minutes.

NOTE!

During the first run of each program, the remaining time

displayed can be slightly misleading, as the dishwasher is estimating

the time. When you run the program a second time, the

dishwasher will calculate the remaining time based on the

previous duration of the program.

STOPPING OR CHANGING A PROGRAM

If you want to change programs after starting the dishwasher, open

the door then press and hold Start/Stop for five seconds. Add

more detergent if the lid of the detergent dispenser has opened.

Then choose a new program, press Start/Stop, and close the door.

DO YOU WANT TO ADD MORE DISHES?

Open the door. The dishwasher stops automatically. Add the

dishes, close the door, and the dishwasher resumes the program.

IF THE DISHWASHER IS TURNED OFF USING

THE MAIN POWER SWITCH OR DUE TO A

POWER FAILURE

If the program was not finished, the interrupted program resumes

when power is restored.

NOTE!

During drying, the program is interrupted if the power is cut or

the door is open for more than 2 minutes.

ONCE THE PROGRAM HAS FINISHED

Once the program has finished, "End" appears on the display.

A buzzer also sounds at the end of the program. See the section

Settings, which describes how to change this function.

Once the dishwasher has finished, it uses only standby power. Turn

off the dishwasher using the main power switch if you want to

completely cut the power. Turn off the water supply valve after

each use.

Customer Care Center 1-800-898-1879