d&b audiotechnik SL Series Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} d&b audiotechnik SL Series. d&b audiotechnik SL Series 13 pages.
Également pour d&b audiotechnik SL Series : Manuel (13 pages), Manuel de gréement (8 pages), Manuel (13 pages), Manuel (13 pages)

Imprimer la page
Connector wiring
Following the driver arrangement within the cabinet.
NLT4 F/M
Phoenix option
6
Rigging components and arrays
Cabinets are mechanically connected using the rigging strands on
both sides of the cabinet front and a central strand at the rear of
the cabinet. All necessary rigging components are mounted on the
cabinet and fold out or slide out when needed.
A detailed description of the rigging components is given in the
respective rigging manuals.

2.2 Connections

The cabinets are fitted with NLT4 F/M connectors. All four pins of
both connectors are wired in parallel using the following pin
assignment:
▪ Pins 1+/1– feeding the forward LF drivers.
▪ Pins 2+/2– are connected to the passive crossover networks
feeding the side firing LF drivers and the MF/HF driver sections.
Phoenix option
NOTICE!
Risk of damage to the system components!
Different pin assignment on the loudspeaker and amplifier.
Þ Please refer to the corresponding amplifier manual.
Cabinets with Phoenix option are fitted with a 4-pole Phoenix
connector socket (Type: DFK PC 4/4 GF) using the following pin
assignment:
▪ Pins 1+/2– feeding the forward LF drivers.
▪ Pins 3+/4– are connected to the passive crossover networks
feeding the side firing LF drivers and the MF/HF driver sections.
A corresponding Phoenix plug (Type: SPC 5/4) is enclosed with
the cabinet.
Phoenix specifications and recommendations
The cabinet comes with a Phoenix plug (Type: SPC 5/4 Push-in
spring connector) which is already connected to the corresponding
Phoenix socket of the cabinet.
The plug allows for direct wire connection without any tools
depending on the cross section and conductor structure.
Technical specifications
Conductor cross section
Flexible, ferrule without plastic sleeve
Flexible, ferrule with plastic sleeve
Ferrule length (min/max)
Release tool
Recommended connecting cable
d&b K3116.100 MC2 SWR
Ferrule without plastic sleeve (enclosed with the cabinet)
d&b LoadMatch
With the d&b four channel amplifier platform, the LoadMatch
function enables the amplifier to electrically compensate for the
properties of the loudspeaker cable used without the need for an
additional sense wire. For applicable loudspeakers, LoadMatch is
therefore independent of the connector type used.
- perliminary -
up to 6 mm
2
(AWG 9)
up to 4 mm
2
(AWG 11)
10/15 mm
Flat-tip screwdriver 0.6 x 3.5 x 100 mm
2 x 2.5 mm
2
(AWG 13)
d&b KSLi8/KSLi12 Manual 1.1 en