d&b audiotechnik E12-SUB Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} d&b audiotechnik E12-SUB. d&b audiotechnik E12-SUB 8 pages.
Imprimer la page
1
n.c.
2
3
4
5
1
2
3
4
Sense Drive
5
Fig. 1: Wiring of the connectors
E12-SUB Manual
E12-SUB
The E12-SUB is a compact bass-reflex design employing a high
excursion 12" driver. The large, specially shaped reflex port enables the
E12-SUB to achieve high sound pressure levels with minimal power
compression and breathing effects.
The E12-SUB cabinet is constructed from marine plywood and has an
impact resistant paint finish. The front of the loudspeaker cabinet is fitted
with a rigid metal grill covered with a replaceable acoustically
transparent foam. The cabinet incorporates a steel handle on one side
and on the top panel is an M20 threaded flange to accept the Z5013
Loudspeaker stand for the deployment of a single cabinet.
Only operate E12-SUB loudspeakers with a correctly configured d&b
NOTICE:
amplifier, otherwise there is a risk of damaging the loudspeaker
components.
Connections
The E12-SUB cabinet is fitted with a pair of EP5 connectors. All pins of
both connectors are wired in parallel. The E12-SUB uses the pin
assignments 3/4 and 5 (Pin 5: SenseDrive - D12 only and in conjunction
with 5-wire cables). Pins 1/2 are designated to d&b full range systems.
Using one connector as the input, the second connector allows for direct
connection to additional cabinets.
The E12-SUB can be supplied with NL4 output connectors as an option
using the pin assignment 2+/2–. Pins 1+/1– are designated to d&b full
range systems. The D12 SenseDrive function is not available with NL4
connectors.
Pin equivalents of EP5 and NL4 connectors are listed in the table below.
EP5
NL4
(4.1 EN)
1
2
3
1+
1–
2+
4
5 (SenseDrive SUB)
2–
n.a.
Page 4 of 8