d&b audiotechnik t-sub Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} d&b audiotechnik t-sub. d&b audiotechnik t-sub 9 pages.
Également pour d&b audiotechnik t-sub : Manuel de l'utilisateur (8 pages)

Imprimer la page
d&b audiotechnik t-sub Manuel
6
d&b SenseDrive
The SenseDrive feature within D12 amplifiers enables electrical
compensation for the properties of the loudspeaker cable used.
SenseDrive requires an additional sense wire. SenseDrive is
therefore only available with EP5 connectors and 5-wire cabling
for applicable loudspeakers.
Note: When the D12 is operated in "Mix TOP/SUB mode",
the SenseDrive function is only available at the output B
connector.

2.3 Operation

NOTICE!
Only operate d&b loudspeakers with a correctly configured d&b
amplifier, otherwise there is a risk of damaging the loudspeaker
components.
Applicable d&b amplifiers:
D80/D20/D12/D6/10D/30D.
Application
Setup
T-SUB
T-SUB
Within applicable d&b amplifiers, the controller setup is available
in Dual Channel or Mix TOP/SUB mode.

2.3.1 Controller settings

For acoustic adjustment the 100 Hz mode can be selected.
100 Hz mode
With the 100 Hz mode selected, the upper operating frequency of
the system is reduced from 140 Hz to 100 Hz.
It can be used when actively driven T-SUB subwoofers are used to
supplement TOP cabinets operated in full range mode, for
example in a distributed sound system. The 100 Hz mode can also
be used to compensate for the effect of close coupling between the
T-SUB and TOP cabinets operated in CUT mode.
Cabinets per
channel
2
d&b T-SUB Manual 1.2 en