d&b audiotechnik Z5555 Instructions de montage - Page 6

Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} d&b audiotechnik Z5555. d&b audiotechnik Z5555 12 pages.

1.5 Z5555 Assembly

Attaching the bracket to ceilings

NOTICE!

Only use mounting parts (fixing anchors and screws) that are

suitable for the intended application.

Observe the occurring extraction forces acting on the fixing

anchors and screws.

Observe the occurring extraction forces acting on the fixing

anchors and screws. The rated extraction forces for the respective

application (wall or ceiling mounting) and cabinet are listed in the

following table.

Application

1 x 21S-SUB

2 x 21S-SUB

To attach the bracket to the ceiling, use the holes shown in the

graphic opposite to provide adequate support.

A corresponding fixing template is supplied with these mounting

instructions. Refer to Þ Chapter 2 "Z5555 Fixing template"

on page 9.

Preparing the cabinet

The threaded inserts of the cabinet are covered by dummy caps in

cabinet color. To remove the caps, proceed as follows:

1. Cut out the caps along the recessed spline using an

appropriate cutting knife.

2. Carefully take off the caps and ensure the cabinet coating is

not peeled off.

d&b Z5555/Z5556 Mounting instructions 1.2 en

Rated extraction forces

620 N

1200 N