d&b audiotechnik SL Z5731 Manuel de gréement - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de gréement pour {nom_de_la_catégorie} d&b audiotechnik SL Z5731. d&b audiotechnik SL Z5731 11 pages. Stacking frame
Également pour d&b audiotechnik SL Z5731 : Manuel de gréement (11 pages)
Imprimer la page
6
All manuals and user guides at all-guides.com
7. At the center rear Splay link slot of the frame, release the
8. Use the upper Locking pin [1] to set the desired tilt angle
9. Lower the cabinet and insert the Splay link into the slot.
10. Raise the back of the cabinet until the Splay link has engaged
2.4 Adding further cabinets
To add further cabinets, proceed as follows:
1. Extend the Front links of the first cabinet on both sides.
2. Place the next cabinet onto the first cabinet until the Front links
3. Insert and lock the second Locking pins of the cabinet's Front
4. Slightly lift the back of the upper cabinet and release the
5. Fold down the Splay link and insert Locking pin [3] to the
bottom Locking pin [2].
(e.g. –10°) on the upper hole grid.
and reinsert the bottom Locking pin [2] (Safety pin).
↳ The Front links are spring loaded and therefore extend
automatically as soon as the Locking pins are released and
pulled out.
fit into the slots of the cabinet.
links on both sides.
Locking pin [3] holding the Splay link in its park position
(Þ
).
Tension mode hole at the bottom of the rigging strand (Þ
d&b Z5731 Rigging manual 1.1 en
Assembly/Disassembly
).