Bluesound Pulse Mini Manuel du propriétaire - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Bluesound Pulse Mini. Bluesound Pulse Mini 4 pages.
Également pour Bluesound Pulse Mini : Manuel d'installation rapide (9 pages)
Imprimer la page
LED/MUTE BUTTON : This button has multiple functions - an indicator of network connectivity and a
2
MUTE button. For a full listing of LED Blink Codes, please see #1 – Blink Codes. Press to temporarily mute
audio output. Press again to restore audio from mute mode. When MUTE mode is selected the LED indicator
will flash blue.
+, - (VOLUME) : Toggle either button to vary volume level. Volume level will not change if you press and hold either button.
3
(+) : Increase volume level
(-) : Decrease volume level
PREVIOUS TRACK/NEXT TRACK : These buttons can be used to go back to the previous track◄ ◄ or skip to the
4
next track ► ► in your current playlist.
LAN PORT : The LAN PORT connection can be used with the Ethernet cable provided. This is an optional
5
connection since the PULSE MINI can be connected to the network through a Wi-Fi connection to your router.
To setup the PULSE MINI using the LAN Port a Wired Ethernet connection is required. Using the Ethernet
cable provided, connect one end of the Ethernet cable to the LAN port of your wired Ethernet broadband router
and the other end to the PULSE MINI's LAN port.
USB (TYPE A) : Connect a USB mass storage device or Bluetooth adaptor to the USB input. Typical USB mass
6
storage devices compatible with the PULSE MINI include portable flash memory devices and external hard
drives (FAT32 formatted).
OPTICAL IN/ANALOG IN : Using a 3.5mm Stereo Audio Cable (not provided), connect one end to the Analog In
7
of the PULSE MINI and the other end to the corresponding analog output of other compatible devices. The source
will show as an Analog Input in the Navigation Drawer of the Bluesound app. Using an Optical to 3.5mm convertor
(included with the PULSE MINI), a digital optical source can also be added. This will appear as Optical Input in the
Navigation Drawer.
SERVICE : Use the SERVICE port in conjunction with USB (Type B Mini) to initially load firmware on the Player.
8
This is not for consumer use. Only Authorized Bluesound Service personnel can access this USB port and
SERVICE control button.
HEADPHONE JACK : A 3.5mm headphone jack is located on the front of the PULSE MINI.
9
AC MAINS INPUT : The PULSE MINI comes supplied with two separate AC power cords. Select the AC
10
power cord appropriate for your region. Before connecting the plug to the wall outlet, connect firmly the other
end of the AC power cord to PULSE MINI's AC Mains input socket. Never force the plug into a wall outlet.
An adaptor may be necessary in certain regions. Always disconnect the plug from the wall outlet first, before
disconnecting the cable from the PULSE MINI's AC Mains input socket.