Bluesound A860 Manuel du propriétaire - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Bluesound A860. Bluesound A860 11 pages.

ATTENTION!

Please ensure that the A860 is powered off or unplugged from the mains power outlet before making any connections. It is also advisable to power

down or unplug all associated components while making or breaking any signal or AC power connections.

ZONE 1 – 4 LED INDICATORS

• ZONE input channels with active source or input signal will have

their corresponding ZONE LED indicators illuminated in blue.

• If there is no active source or input signal connected to a

particular ZONE, the corresponding ZONE LED indicator will not

light up.

IMPORTANT NOTICE

If the selected source is GLOBAL and there is an active source at

GLOBAL's INPUT terminals, all four (ZONE 1-4) Zone LED indicators

will illuminate at the same time.

2 GLOBAL INPUT/OUTPUT

• Always turn OFF the A860 and other components in the system

before connecting or disconnecting anything to GLOBAL INPUT/

OUTPUT terminals.

• Ensure that the supplied INPUT/OUTPUT terminal block's "+, -,

GND" are wired accurately to corresponding OUTPUT terminals

of compatible external devices such as preamplifiers, processors

or other applicable devices. Install the wired up INPUT/OUTPUT

terminal block to A860's GLOBAL INPUT terminal.

IDENTIFICATION OF CONTROLS

• Ensure that the supplied INPUT/OUTPUT terminal block's "+, -,

GND" are wired accurately to corresponding INPUT terminals of

compatible external devices such as amplifiers, receivers or other

applicable devices. Install the wired up INPUT/OUTPUT terminal

block to A860's GLOBAL OUTPUT terminal. The GLOBAL

OUTPUT terminal is a line level "loop through" output. The same

level of input signal at the GLOBAL INPUT terminal is available

at the OUTPUT terminal thereby allowing the same signal to be

shared or passed on to another amplifier.

• These INPUT/OUTPUT terminals are dedicated only to GLOBAL

settings.

• If the LOCAL/GLOBAL mode selector switch of a particular ZONE

is set to GLOBAL, the source connected to GLOBAL's INPUT

terminals will become the active input for the particular ZONE.

3 GLOBAL GAIN CONTROL

• Before switching ON the A860 for the first time, make sure all

GAIN controls are set to minimum (MIN) level position.

• This GAIN control is dedicated only to GLOBAL settings. Rotate

clockwise or counterclockwise to adjust GLOBAL audio level.

• Refer also to item about GAIN CONTROL (ZONE 1- 4).