Asko T761 Manuel de démarrage rapide

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Asko T761. Asko T761 2 pages. User manual quick start guide en
Également pour Asko T761 : Manuel de démarrage rapide (2 pages), Manuel de planification et de conception (19 pages), Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (2 pages)

Imprimer la page

Dryer Quick Start Guide

We know you're excited about owning an ASKO dryer and you're anxious to get started, so here is a brief summary of the operating

procedures. To get the most of the features of your machine, we recommend that you read your Use and Care Guide.

Models T761 and T781 have ASKO's state-of-the-art EasyControl™ panel, as illustrated below. To select a program, simply press one of the

preset program buttons then press Start. Refer to "Preset Programs" below for a definition of these programs.

Power Button

Press to turn on power

to the machine.

Power Indicator Light

Glows when the power

is turned on.

Start Button

Press to start

a program.

The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power

must be on before you can set the programs or start the machine.

Once you have selected a program (P1–P4), press this button to start the dryer. If you open the door during a program, the dryer will

Start

stop tumbling automatically. To continue the program from where it stopped, close the door and press Start.

To stop a program, press this button until the dryer stops (about three seconds). If you stop the dryer this way, you will have to select

Stop

a new program and press Start to restart the dryer.

To interrupt a program, simply open the door. The dryer will stop tumbling automatically. To continue the program, close the door and press

Start. The program will continue from the point it was interrupted.

To stop or cancel a program, press and hold the Stop button until the dryer stops (about three seconds). To restart the dryer, you will have to

reselect a program and press Start.

With ASKO's Sensidry™ system, you need never worry about overdrying your laundry. Just select the proper program for the type of fabric

you're drying and Sensidry does the rest. Once you select a program, Sensidry monitors the temperature and measures the humidity level.

When it detects the appropriate measurements, it automatically shuts off the machine.

There are four preset programs, as defined in the table below. To select a program, simply press one of the program buttons and press Start.

For additional programming options, refer to the Use and Care Guide.

Preset

Program

Extra Dry

Dry

Normal Dry

Iron Dry

* The dry temperature for Program P4 on Model T781 is Normal.

ASKO's EasyControl™ panel makes it simple to customize the preset programs to perfectly fit your laundry needs. For example, you can

reprogram the dry temperature, change the cool-down time, set a delayed start, etc. For instructions, refer to "Customizing the Preset

Programs" in your Use and Care Guide.

Preset Programs

Press one of these buttons

to select a program.

Start

Stop

Program Selection Controls

Stop Button

These buttons allow you to customize the preset program settings,

Press to stop

such as temperature settings, turning the buzzer off, setting delay

a program.

start time, etc. Refer to the Use and Care Guide for instructions.

Types of Laundry

Heavy fabrics, such as denim jeans

Towels, cotton, linen, etc.

Permanent press, synthetics, etc.

Washable silk, acrylics, etc.

LCD Window

Displays the program, temperature settings,

and program run time.

Dry

Temp

Normal

Low *

Anti-Crease

Buzzer

1 hour