D&R HYBRID-1 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} D&R HYBRID-1. D&R HYBRID-1 13 pages. Interface between professional audio equipment and the public telephone network
Également pour D&R HYBRID-1 : Manuel de l'utilisateur (17 pages)

Imprimer la page
D&R HYBRID-1 Manuel de l'utilisateur
AUDIO CONNECTIONS TELEPHONE HYBRID TO
In case you are not working with a D&R mixer the connections are pretty much the same.
1. Clean feed output or AUX output to the mixer must be connected to ''TO CLEAN FEED OUTPUT" of the Hybrid.
2. Mic input of the mixer must be connected to "TO MIC INPUT" of the Hybrid.
As the Hybrid-1 is a passive unit signal loss is to be expected so drive it with a maximum signal and connect
the return telephone signal always to a mic input of your mixer.!
Above you see the XLR connections if your mixer has balanced or unbalanced XLR type of connectors on the mixer
side. In case you have an unbalanced clean feed or you use an AUX output be sure that pin-3 is also grounded on the
XLR side of the cable. This is for both male and female XLR connectors.
The pinning number is the same on both XLR type of connectors.
ANOTHER MIXER
See mirrored pinning numbers in Male and Female XLR's below
Pin1= ground
Pin2 =Hot
Pin3=Cold
page-7