Ambient Weather WeatherBridge Nano Manuel de démarrage rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Ambient Weather WeatherBridge Nano. Ambient Weather WeatherBridge Nano 15 pages. Weather station server for davis instruments

Imprimer la page

6. Wait about two minutes for the Nano to completely boot up.

7. For consoles, the console will power up in Setup Mode. Press and hold the DONE button for

two seconds to exit the console setup mode.

5. Accessing the Nano over your Local Network

The Nano broadcasts a WiFi signal. To connect your computer or smart device to the Nano for

programming, open your WiFi settings from your computer or smart device, and connect to

meteobridge-xxxxxxxxxxxx (where xxxxxxxxxxxx is the MAC address of your device).

When prompted, enter the password: meteobridge

Below is an example for Windows and an iPhone.

Once you are connected to the Nano, open a web browser and type in the following URL:

You will be prompted for a Username and Password. Enter:

Username: meteobridge

Password: meteobridge

The Nano will scan your WiFi network. This may take a few minutes to display the Network

Administration Page.

Version 1.0

Figure 4

http://192.168.169.1

Page 4