Ambient Weather WH2F Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ambient Weather WH2F. Ambient Weather WH2F 20 pages.

Imprimer la page

Note: Make sure the sensor is mounted vertically and not lying down on a flat surface. This will

insure optimum reception.

3.2 Wireless Reception Considerations

Wireless signals are impacted by distance, interference (other weather stations, wireless phones,

wireless routers, TVs and computer monitors), and transmission barriers, such as walls. In general,

wireless signals will not penetrate solid metal and earth (down a hill, for example).

The following is a table of reception loss vs. the transmission medium. Each "wall" or obstruction

decreases the transmission range by the factor shown below.

Medium

Glass (untreated)

Plastics

Wood

Brick

Concrete

Metal

4 Console Operation

Note: The console has four keys for easy operation: SET key, ALARM key, MIN/MAX key and

+ key. There are four program modes: Quick Display Mode, Set Mode, Alarm Mode and Min/Max

Mode.

Any program mode can be exited at any time by either pressing the SNOOZE/LIGHT key (on the top

of the display console), or waiting for the 10-second time-out to take effect.

4.1 Quick Display Mode

4.1.1 Quick Display Mode Quick Reference Guide

Command

[SET]

Enter Quick Set Mode, Outdoor

Temperature vs Dew Point

[SET]

Relative Pressure vs Absolute

Pressure

4.1.2 Quick Display Mode Operation

While in Normal Mode, press the SET key to enter the Quick Display Mode as follows (once for

outdoor temperature and dew point and twice for absolute pressure and relative pressure):

Display Outdoor Temperature and Dew Point. Press the MIN/MAX or + key to toggle

between outdoor temperature and dew point.

Absolute Pressure and Relative Pressure. Press the MIN/MAX or + key to toggle between

absolute pressure and relative pressure.

Version 2.1

Figure 4

Mode

Press

temperature and dew point.

Press [+] to toggle between relative pressure and

absolute pressure.

Page 7

RF Signal Strength Reduction

5-15%

10-15%

10-40%

40-80%

90-100%

Settings

[+]

toggle

between

outdoor