Ambient Weather WS-0100 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ambient Weather WS-0100. Ambient Weather WS-0100 9 pages. Advanced weather station

Imprimer la page

1. Set Time and Units

Problem

Temperature sensor reads too high in the

day time.

Indoor and Outdoor Temperature do not

agree

Multi-channel Humidity do not agree

Humidity is reading 20% at low humidity

or 95% at high humidity

Display console contrast is weak

8. Accessories

The following software and hardware accessories are available for this weather station at

www.AmbientWeather.com

Accessory

Energizer AA Lithium

Battery (2-pack) - Batteries

for Long Life and Cold

Climates

SRS100LX Temperature

and Humidity Solar

Radiation Shield

Ambient Weather WH3C

Thermo-Hygrometer

9. Liability Disclaimer

Please help in the preservation of the environment and return used batteries to an authorized depot.

The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in

Version 1.0

Solution

Move the remote sensor to a higher location. Move the

remote sensor to a closer location.

Radio Frequency (RF) Sensors cannot transmit through

metal barriers (example, aluminum siding) or multiple,

thick walls.

Make sure the thermo-hygrometer is mounted in a

shaded area on the north facing wall. Consider the

following radiation shield if this is not possible:

http://www.ambientweather.com/amwesrpatean.html

Allow up to 30 minutes for the sensors to stabilize due to

signal filtering. The indoor and outdoor temperature

sensors should agree within 4 °F (the sensor accuracy is

± 2 °F)

Allow up to 30 minutes for the sensors to stabilize due to

signal filtering. The multi-channel sensors should agree

within 10% (the sensor accuracy is ± 5%)

The humidity sensor is out of range (20 to 95%)

Replace console batteries with a fresh set of batteries.

Image

Description

AA lithium batteries for cold weather

climates.

Solar Radiation Shield improves temperature

accuracy for hot weather climates. Remove

the rain guard and install over

thermo-hygrometer.

The WS-0100 supports up to three remote

channels (one is included).

Page 7