Ambient Weather WS-02 Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ambient Weather WS-02. Ambient Weather WS-02 4 pages. Cabled indoor and outdoor thermometer with probe
Imprimer la page
Term
Accuracy
Range
4. Specifications
4.1 Measurement Specifications
The following table provides specifications for the measured parameters.
Measurement
Indoor Temperature
Outdoor Temperature
4.2 Power Consumption
2 x AAA 1.5V Alkaline batteries
Battery life: Minimum 24 months for base station
5. Troubleshooting Guide
If your question is not answered here, you can contact us as follows:
1. Email Support:
2. Live Chat Support:
3. Technical Support: 480-283-1644 (M-F 8am to 4pm Arizona Time)
Problem
Temperature sensor reads too high in the
day time.
Indoor and Outdoor Temperature do not
agree
Display console contrast is weak
6. Liability Disclaimer
Please help in the preservation of the environment and return used batteries to an authorized depot.
The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in
wild country and/or in unauthorized grounds strongly damages the environment.
Reading the "User manual" is highly recommended. The manufacturer and supplier cannot accept any
responsibility for any incorrect readings and any consequences that occur should an inaccurate reading
take place.
This product is designed for use in the home only as indication of weather conditions. This product is
not to be used for medical purposes or for public information.
The specifications of this product may change without prior notice.
This product is not a toy. Keep out of the reach of children.
Version 1.0
Accuracy is defined as the ability of a measurement to match the actual
value of the quantity being measured.
Range is defined as the amount or extent a value can be measured.
Range
32 to 140 °F
-40 to 140 °F
www.ambientweather.com/chat.html
Solution
Make sure the probed thermometer is mounted in a
shaded area on the north facing wall.
Allow up to 30 minutes for the sensors to stabilize due to
signal filtering. The indoor and outdoor temperature
sensors should agree within 4 °F (the sensor accuracy is
± 2 °F)
Replace console batteries with a fresh set of batteries.
©Copyright 2012, Ambient LLC. All Rights Reserved.
Definition
Accuracy
± 2 °F
± 2 °F
(M-F 8am to 4pm Arizona Time)
Resolution
0.1 °F
0.1 °F
Page 3