Ambient Weather WS-07 Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ambient Weather WS-07. Ambient Weather WS-07 15 pages. Wireless indoor/outdoor 8-channel thermo-hygrometer with jumbo display
Imprimer la page
1. Remove the battery door on the back of the sensor by removing the set screw, as shown in
Figure 1 .
2. BEFORE inserting the batteries, locate the dip switches on the inside cover of the lid of the
transmitter.
Figure 2 displays all four switches in the OFF position (factory default setting).
3. Channel Number: The WS-07 supports up to eight transmitters. To set each channel number
(the default is Channel 1), change Dip Switches 1, 2 and 3, as referenced in Table 1.
4. Temperature Units of Measure: To change the transmitter display units of measure (°F
vs. °C), change Dip Switch 4, as referenced in Table 1.
Version 1.0
©Copyright 2013, Ambient LLC. All Rights Reserved.
Figure 1
Figure 2
Page 3