Ambient Weather WS-091-C Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ambient Weather WS-091-C. Ambient Weather WS-091-C 11 pages. Three channel display wireless thermometer (console only)
Imprimer la page
button, and CHANNEL/+ button.
3.1 Channel Selection
Press the CHANNEL/+ button to switch the display between the Channel 1 temperature, Channel 2
temperature, indoor temperature
indication arrow
will point at the selected channel. In scroll mode, the indoor temperature, and
Channels 3-8 will alternately be displayed in five second intervals.
3.2 Min and Max Alarm
You can set a min and max temperature alarm on the Channel 1 and Channel 2 thermometers. If the
alarm is exceeded for more than 10 minutes, as audible alert will occur and the alarm value will flash.
To silence the alarm, press any button.
To set the alarm, or adjust the min and max alarm settings, press the CHANNEL/+ button until the
channel indication arrow
3.2.1 Turning On and Off the Alarm
With the indicator arrow
on and off the alarm. The alarm icon will appear
The alarm will sound if the sensor falls bellow or rises above the MIN/MAX limit.
3.2.2 Setting the Min and Max Alarm
With the indicator arrow
for 3 seconds and the MAX alarm will flash. Press the CHANNEL/+ button to increase the MAX
alarm and the CLEAR/- button to decrease the MAX alarm. Press and hold the + or - button to change
rapidly.
Press the ALARM button again and the MIN alarm will flash. Press the CHANNEL/+ button to
increase the MIN alarm and the CLEAR/- button to decrease the MIN alarm. Press and hold the + or -
button to change rapidly.
When complete, press the ALARM button again, and the display will return to normal mode.
3.2.3 Viewing the Min and Max Alarms
With the indicator arrow
button to view the Channe1 and Channel 2 alarm limits.
3.3 Reset Max/Min
With the indicator arrow
button for 3 seconds to restore the MAX and MIN values to the current value.
3.4 Temperature Units of Measure
With the indicator arrow
Version 1.0
©Copyright 2013, Ambient LLC. All Rights Reserved.
, remote sensors 3 through 8, and scroll mode
points at the selected channel.
pointing at the appropriate channel, press the ALARM button to turn
when set, and disappear when disabled.
pointing at the appropriate channel, press and hold the ALARM button
pointing at the indoor temperature
pointing at the appropriate channel, press and hold the CLEAR/-
pointing at the indoor temperature
. The channel
channel, press the ALARM
channel, press and hold the
Page 5