Ambient Weather WS-40 Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Ambient Weather WS-40. Ambient Weather WS-40 7 pages. Wireless indoor / outdoor thermometer

Imprimer la page

Problem

Temperature sensor reads too high in the

day time.

Indoor and Outdoor Temperature do not

agree

Display console contrast is weak

7. Liability Disclaimer

Please help in the preservation of the environment and return used batteries to an authorized depot.

The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in

wild country and/or in unauthorized grounds strongly damages the environment.

Reading the "User manual" is highly recommended. The manufacturer and supplier cannot accept any

responsibility for any incorrect readings and any consequences that occur should an inaccurate reading

take place.

This product is designed for use in the home only as indication of weather conditions. This product is

not to be used for medical purposes or for public information.

The specifications of this product may change without prior notice.

This product is not a toy. Keep out of the reach of children.

No part of this manual may be reproduced without written authorization of the manufacturer.

Ambient, LLC WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL,

PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR

MALFUNCTION OF THIS PRODUCT.

8. FCC Statement

Statement according to FCC part 15.19:

This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions:

Version 1.0

Solution

through solid metal (acts as an RF shield), or earth

barrier (down a hill).

Move the display console around electrical noise

generating devices, such as computers, TVs and other

wireless transmitters or receivers.

Move the remote sensor to a higher location. Move the

remote sensor to a closer location.

Radio Frequency (RF) Sensors cannot transmit through

metal barriers (example, aluminum siding) or multiple,

thick walls.

Make sure the thermometer is mounted in a shaded area

on the north facing wall. Consider the following

radiation shield if this is not possible:

http://www.ambientweather.com/amwesrpatean.html

Allow up to 30 minutes for the sensors to stabilize due to

signal filtering. The indoor and outdoor temperature

sensors should agree within 4 °F (the sensor accuracy is

± 2 °F)

Replace console batteries with a fresh set of batteries.

Page 6