Ambient Weather WS-2063 Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ambient Weather WS-2063. Ambient Weather WS-2063 6 pages. Indoor temperature and humidity monitor with backlight

Imprimer la page

2. Getting Started

2.1 Monitor Features

No
Description
1 LIGHT Button. Press to turn on the back
light for 5 seconds.
2 IN/ OUT button.
- When the optional probe is connected,
press to switch between the indoor and
probe temperature.
- Press and hold for 2 seconds to scroll
between indoor and probe temperature
automatically every 5 seconds. Press
again to stop the scroll mode.
3 CHECK/RESET button.
- Press to instantly check the current
temperature, humidity and low battery.
- Press and hold for 2 seconds to reset the
minimum and maximum data.
4 LCD Display
5 MANUAL/Past 24hr slide switch.
- Slide to MANUAL to record the
minimum and maximum between manual
resets.
- Slide to Past 24hr to record the
minimum and maximum every 24 hours
(based on power up or manual reset).
6 OUT TEMP sensor (optional)
Version 1.0
©Copyright 2016, Ambient LLC. All Rights Reserved.
Figure 1
No
7 OUT TEMP sensor (optional) jack.
8 NIGHT ON/OFF slide switch.
Slide to the ON position to activate the
night light feature.
- When the switch is ON, the backlight will
turn on automatically when the room is
dim or dark.
- Slide to OFF to turn the backlight feature
off.
9
°C / °F button
- Press it to switch between Celsius and
Fahrenheit.
10
RESET button
- Press to restore to default values.
- Press to begin 24 hour minimum and
maximum timer.
11 Battery compartment
12 Suspension eye for mounting to a wall.
Description
Page 2