Ambient Weather RC-8365 Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ambient Weather RC-8365. Ambient Weather RC-8365 14 pages. Clearview radio controlled projection clock with indoor and outdoor temperature
Command
[TIME] + 2
Time Zone
seconds
[TIME]
Year
[TIME]
Month
[TIME]
Day
[TIME]
DST (Daylight Savings Time)
[TIME]
Hour
[TIME]
Minute
[TIME]
Second
[TIME]
Language
[TIME]
Exit Time and Date Settings
[TIME] + 2 seconds
[TIME]
5.1.1 Daylight Savings Time
The clock has been programmed to automatically switch when daylight saving time is in effect. Your
clock will display "DST". If you live in Arizona, make sure you turn off the DST referenced in
Section 5.1.
5.2 Alarm Settings
While in normal time mode, press the TIME button once to set ALARM1. Press the TIME button
again to set ALARM2. Once ALARM1 or ALARM2 are displayed in the date field (see Figure 4, No.
10), perform the following:
Command
[
] + 2
Enter Alarm Settings
ALARM
seconds
Alarm Hour
Alarm Minute
[ALARM]
[ALARM]
Exit Alarm Settings
[ALARM] + 2 seconds
[ALARM]
5.2.1
Using the Alarm and Snooze Functions
1. Set the alarm time as described in Section 5.2.
2. Press the ALARM button once to turn on ALARM1
3. Press the ALARM button again to turn on ALARM2
4. Press the ALARM button again to turn on
5. Press the ALARM button again to turn off
Version 1.0
©Copyright 2018, Ambient LLC. All Rights Reserved.
Mode
means press and hold the TIME button for two seconds.
means press but do not hold the TIME button.
Figure 5
Mode
means press and hold the ALARM button for two seconds.
means press but do not hold the ALARM button.
Figure 6
Settings
The Time Zone Map
UP key to select your time zone.
Note: There are four time zones to select
from: P=Pacific, M=Mountain, C=Central,
E=Eastern.
Press [UP] to increase, [DOWN] to decrease.
Press [UP] to increase, [DOWN] to decrease.
Press [UP] to increase, [DOWN] to decrease.
Press [UP] to turn DST On or Off (Arizona only)
Press [UP] to increase, [DOWN] to decrease.
Press [UP] to increase, [DOWN] to decrease.
Press [UP] to reset to 0.
Press [UP]
to change between GB (English), FR
(French), DE (German), ES (Spanish) and IT
(Italian).
Settings
Press [UP] to increase, [DOWN] to decrease.
Press [UP] to increase, [DOWN] to decrease.
1.
2.
1 and
2.
1 and
2.
will flash.
Press the
Page 7