Asko CCT1252W Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Asko CCT1252W. Asko CCT1252W 16 pages.

Operation

This remote control must be paired to the cooker hood before first use.

1. Start up the appliance (power on). The hood will start in 'pairing mode for 5 minutes.

2. Activate the Remote pairing mode by holding 'c and 'w for 3 sec.

3. During pairing all the indicators on the hood and remote will blink. All indicators will turn off when

the connection is established.

If the connection is not established repeat the entire pairing process.

NOTE!

Remote control will go into standby after 30 seconds. The remote will wake up when it is picked

up or detects movement.

1. Press and hold the 'Fan key on the remote for 1 second.

The cooker hood will switch on at the lowest setting.

2. Press the '+ key again for a higher fan setting. Press and hold the '+ key for 1 second to select

the highest setting (boost).

3. Press the '- key to select a lower setting.

The extraction setting is indicated by the speed level indicators on the hood.

4. To switch off the cooker hood, press and hold the 'Fan key for 1 second.

NOTE!

Lighting and motor key must be pressed for at least 1 second. This is to prevent the functions

from being accidentally switched on or off.