Ambirad Vision VSOUH Panduan Perakitan & Instruksi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Perakitan & Instruksi untuk Pemanas Ambirad Vision VSOUH. Ambirad Vision VSOUH 20 halaman. Radiant tube heaters

Halaman Cetak

2. Assembly Instructions.

PLEASE READ this section prior to

assembly to familiarise yourself with the

components and tools you require at the

various stages of assembly. Carefully open the

packaging and check the contents against the

parts and check list.

The manufacturer reserves the right to alter

specifications without prior notice.

2.1

Tools Required.

The

following

tools

advisable to complete the tasks laid out in this

manual.

Trestles

Wrench With

Extension

Saw

2.2

Assembly Notes (refer fig's 1-7)

2.2.1 Tubes

Identify and position tubes (A) on trestles.

Position the tubes so that the tube seams are

facing inwards.

Mark out the position of the bracket centres

from the dimensions shown on the assembly

drawings.

U bend

end

Return tube

and

equipment

are

Leather

Faced

Gloves

13mm

Socket

Pop

Riveter

& 3/16"

Rivets

Firing Tube

Burner end

Please ensure that all packaging is

disposed of in a safe environmentally

friendly way.

For your own safety we recommend the

use of safety boots and leather faced

gloves when handling sharp or heavy items. The

use

protective

recommended.

Suitable alternative tools may be used.

Pozidrive

Screwdriver

Tape

Measure

Silicone

Sealant

& Gun

Note:

Four module heaters (45kW & 50kW)

are assembled in two sections.

Note:

First section of burner tube on

PROPANE

four

(45kW & 50kW) is stainless steel.

2.2.2 Brackets

Slide the bracket assemblies (B) along to the

tubes to the dimensional positions and in their

correct order as detailed in the assembly

drawings. We recommend brackets are fixed to

tubes prior to hanging.

When fixing the bracket to the tubes it

should be noted that the 'U' bolts on the

first bracket CLOSEST TO THE BURNER*

and last bracket CLOSEST TO 'U' BEND

should be tightened to achieve a minimum

torque setting of 15Nm².

* not on the firing tube on 2 module versions

Doc No. 700021 Page 3 of 20

eye

wear

also

10mm,

12mm &

13mm

Spanners

4 & 5mm

Allen

Keys

Herringbone

Systems Only

module

heaters