Ambirad TORNADO Panduan Instalasi dan Pengoperasian - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Pemanas Gas Ambirad TORNADO. Ambirad TORNADO 16 halaman. Gas fired mobile heater
Juga untuk Ambirad TORNADO: Buku Petunjuk (8 halaman)

Introduction.

Welcome to the Ambi-Rad Tornado heater. A
revolution in mobile gas fired space heating.
This instruction is intended for sole purpose of
use as indicated.
Document Index.

2 Installation Requirements

2.1 Gas Leaks
2.2 Gas Cylinder
2.3 Electrical Supply
3 Technical Details
3.1 Dimensions
3.2 Technical Data
3.3 Internal Wiring Diagram
4 Operating Instructions
4.1 Moving the product
4.2 Operating the unit
4.3 Thermostat Control
4.4 Operation
4.4 Disconnection
5 Cleaning & Maintenance
Important, please read.
PLEASE READ this document prior to installation
and operation to familiarise yourself with the
components and any tools you require at the
various stages of assembly.
The manufacturer reserves the right to alter
specifications without prior notice.
This appliance must be installed in accordance
with such regulations as are in force.
This appliance conforms to IP44 of IEC 34-5.
Subject to compliance to clearance distances,
ventilation and flue requirements detailed in these
instructions the heater can be used inside
marquees.
Only use in a well ventilated area. See technical
details Section 3.2.
The heater is not for domestic use.
The heater is designed for space heating only.
Do not use the heater in basements or below
ground level.
This appliance is fitted with a hose and regulator.
These instructions must be given to the user.
The information contained within this instruction
sheet is for use with Ambi-Rad products within the
country of use and in accordance with the rules in
force and by a competent person based on cur-
rent HSE guidelines.
6 Ducted Options
6.1 Flue Outlet
6.2 Ducted Air
6.3 Air Delivery
7 Servicing Instructions
7.1 Health & Safety
7.2 Tools Required
7.3 Combustion Fan Maintenance
7.4 Axial Fan Maintenance
7.5 Heat Exchanger Maintenance
7.4 Burner Maintenance
7.5 Component Replacement
8 Fault Finding & Spare Parts
8.1 Fault Finding Flow Chart
8.2 Spare Parts Listings
9 User and Operating Instructions
Observe the cool down period and never handle
the heater when hot.
Never place any objects, particularly combustible
materials on top of the heater and always ensure
that flues are not obstructed.
For your own safety we recommend the use of
safety boots and leather faced gloves when
handling any sharp or heavy items. The use of
protective eye wear is also recommended.
Bend knees when lifting the product via the
handles for wheeling.