Ambroise GENUX 2 ORTHOSIS Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Pengguna untuk Peralatan Medis Ambroise GENUX 2 ORTHOSIS. Ambroise GENUX 2 ORTHOSIS 16 halaman.

GENUX. This drawing is used during the production process to choose the right sizes and shapes. When the GENUX 2 is complete, Ambroise

sends the orthosis to the orthotist. Your orthotist will then invite you to an appointment where you can fit the knee orthosis. During this

appointment, the orthotist will also need to adjust some elements of your GENUX 2. For example, setting the lengths of the straps, but the

orthotist also looks at the level of correction achieved with the GENUX 2. If all settings are right, you can take the GENUX 2 home so you

can practice using it.

DONNING THE GENUX

The GENUX 2 can be worn either underneath clothing or on top of clothing. When worn underneath clothing we advise to wear a sleeve

under the brace. There needs to be migration underneath the GENUX at the front side of the upper leg (see Anti-Slipping above). The human

skin can have a relatively high coefficient of friction, making slipping of the interfaces with respect to the skin more difficult. The sleeve can

ensure a low coefficient of friction between sleeve and pelottes. Furthermore the sleeve is an extra protective cover for sensitive skin. If you

order a GENUX 2 a sleeve will be supplied. You can order spare sleeves in various designs on our web shop.

When donning a GENUX 2 please follow the steps as described below

Step 1 Put on the calf strap

A) First, the GENUX 2 calf strap must be donned. Step with the foot through this circular strap.

B) Make sure that the clip is on the front of the calf strap and facing down.

C) Secure the calf strap just above the widest part of the calf and just below the knee

D) Evenly tighten the two ends of the strap. (see Figure 5)

Step 2 Put the GENUX 2 on the leg

A) Donning the GENUX 2 is best done in sitting position, with the knee bent in 90°.

B) Now also bend the GENUX 2 with your hands till 90°.

C) Now push the GENUX 2 frame on your leg.

Step 3 Attach the GENUX 2 to the calf strap

A) The calf strap and GENUX 2 are connected by means of a plastic clip. Click the two ends of the clip

together (see Figure 6).

B) The elastic of the calf strap will now pull the GENUX 2 upwards.

Step 4 Push the GENUX 2 down

A) Push the GENUX 2 against the tension of the elastic down until the interface just above the knee t

ouches the upper leg.

Step 5 Attach the strap just below the knee

A) The first strap that is attached is the strap that is just under the knee.

B) Hook the clip into the connector.

C) Close the clip. (See photo series 'closing the clips' on the next page)

Step 6 Attach the lower strap

A) Attach the lower strap in the same way as the strap just below the knee

Step 7 Attach the upper leg straps

A) Attach the upper leg straps in the same way as the strap just below the knee.

Step 8 Adjust strap tension (B1 and B4, top and bottom strap)

User information | +31 (0)53 4302 836 | [email protected] | www.ambroise.nl

GENUX.2023.01

Figure 5: Putting on the calf strap

Figure 6: Attach GENUX 2 to calf strap