Ambu aBox 2 Manual Penggantian - Halaman 15

Jelajahi secara online atau unduh pdf Manual Penggantian untuk Peralatan Medis Ambu aBox 2. Ambu aBox 2 16 halaman.

5. Final Inspection and Test

CAUTIONS

•

To ensure the displaying unit functions optimally and to avoid compromising

electrical safety, always perform the tests specified in section 5 after it has been

reassembled. If any part of the tests fails after spare part replacement, do not use the

displaying unit.

Perform the following inspections and tests after assembly prior to use:

Examine displaying unit for visual damage

Closely examine the displaying unit and other parts for any damage

displaying unit if it is damaged in any way.

Visual inspection with a functioning scope

Connect the displaying unit to a suitable power outlet via the power cable

a functioning visualization device to the displaying unit by plugging it into the

visualization device connector (VDC) port

matching, and the arrows are aligned. Turn on the displaying unit on the power button.

Verify that a live video image appears on the screen by pointing the distal end of the

Ambu visualization device towards an object, e.g. the palm of your hand, when the Live

View

tab is selected in the toolbar to the left

III

For other relevant testing of the displaying unit, refer to the requirements of IEC 62353 or other

relevant safety tests according to local guidelines.

III

. Ensure that the connector colours are

. Do not use the

. Connect